Electrolux 1554-6 iU Disposal, Remove transport packaging, Appliance Packaging Information

Page 6

Disposal

Appliance Packaging Information

All materials are environmentally friendly. They can be dumped or burned at an incinerating plant without danger.

About the materials: The plastics can be recycled and are identified as follows:

>PE< for polyethylene, e.g. the outer covering and the bags in the interior.

>PS< for polystyrene foam, e.g. the pads, which are all free of chlo- rofluorocarbon.

The carton parts are made from recycled paper and should be disposed of at a waste-paper recycling collection location.

Disposal of old Appliances

For environmental reasons, refrigeration appliances must be disposed of properly. This applies to your old appliance, and - at the end of its service life - for your new appliance as well.

Warning! Before disposing of old appliances make them inoperable. Remove plug from mains, sever the power cable, remove or destroy any snap or latch closures. This eliminates the danger that playing children lock themselves into the appliance (danger of suffocation!) or place themselves into other life-endangering situations.

Disposal:

The appliance may not be disposed of with domestic waste or bulky refuse.

The refrigerant circuit, especially the heat exchanger at the back of the appliance, must not be damaged.

Information concerning collection schedules or locations can be obtained from your local Council or Environmental Health Office.

Remove transport packaging

The appliance and the interior fittings are protected for transport.

Pull off the adhesive tape on the left and right side of the door.

6

Image 6
Contents ÖKO-SANTO 1554-6 iU Dear customer Contents Prior to initial start-up Important Safety InstructionsSafety of children RefrigerantDaily Operation Case of malfunctionAppliance Packaging Information DisposalRemove transport packaging Disposal of old AppliancesInstallation Installation LocationReversing the door Left door openingUntil they click Page Remove covering and adjust the bracket locking nuts Adjust heightBuilding the appliance in under a worktop Mounting furniture door Screw appliance into place Place the covering strip 220 Power supplyFitting the plinth ~50 HzElectrical Connection This appliance may not correspond withDescription of the appliance Prior to Initial Start-UpView of the appliance Setting 1 means Starting up and temperature regulationSetting 0 means Off Hightest temperature, warmest set- tingCorrect storage Interior AccessoriesStorage shelves/wire trays Vario glass storage shelfDefrosting Switching off the applianceCleaning and Care Fridge defrosts automaticallyAfter everything is dry place appliance back into service Energy Saving TipsSymptom Possible Cause Remedy What to do ifCorrecting Malfunctions Turn the thermostat knob to a colder setting tem- porarily Help us to Help You Service & Spare PartsChanging the light bulb 08705Customer Care Noises during OperationRegulations, Standards, Guidelines