Electrolux D1100-4 Care and Cleaning, Cleaning Materials, Cleaning the Outside of the Appliance

Page 21

CARE AND CLEANING

Before cleaning always allow the appliance to cool down before switching off at the electricity supply.

CLEANING MATERIALS

Before using any cleaning materials on your appliance, check that they are suitable and that their use is recommended by the manufacturer.

Cleaners that contain bleach should NOT be used as they may dull the surface finishes. Harsh abrasives and scourers should also be avoided as damage will occur.

CLEANING THE OUTSIDE OF THE APPLIANCE

Do not use abrasive cleaning materials e.g. Hob Brite, Brillo pads or scourers on painted or printed finishes as damage may occur.

Regularly wipe over the control panel, doors and handles using a soft cloth and hot soapy water. To prevent streaking finish with a soft cloth.

Stainless Steel cream cleaners are abrasive and should be avoided as they may dull the surface finish. Any spillage on the stainless steel finish must be wiped off immediately.

Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard.

Under no circumstances should the door assembly be detached from the product for cleaning.

REMOVING AND REPLACING WIREWORK RUNNERS

Remove all shelves and furniture from the oven.

Hold the wirework at the bottom, unclip from the cavity side and gently pull towards the centre of the oven.

Unhook the runner at the top and remove from the cavity.

To replace the runners, hook the wirework side runner into the cavity, slide back and press into place.

Ensure the wirework runners are firmly in position before replacing the oven shelves.

21

SIDE PANEL

CAVITY

CENTRE

Image 21

Contents Competence D1100-4 Important Safety Information Contents BUILT-IN Electric Fanned Double Oven Description of the ApplianceControl Panel Getting to Know Your ApplianceTelescopic Runners Grill and Oven FurnitureBefore Using the Appliance Electronic Timer HOW to SET the Time of DAYHOW to SET the Countdown To Cancel the Countdown Setting the Oven Timer ControlTo SET the Timer to Switch on and OFF Automatically To Cancel AN Automatic Programme To SET the Timer to Switch OFF onlyTo Return the Appliance to Manual Things to NoteUsing the Telescopic Runners Using Dual GrillWhere fitted Dual GrillGrill PAN and Handle Hints and TipsEnsure the handle is properly located Mins in total Grilling ChartUsing Second Oven Second OvenTo FIT the Second Oven Shelf Hints and Tips Using Ventitherm FAN Operated Cooking Ventitherm FAN Operated CookingTo FIT the Main Oven Shelves Retaining Hook Form Oven Cooking Chart Meattemperature Roasting ChartFAN Controlled Defrosting Using FAN Controlled DefrostingCleaning Materials Care and CleaningCleaning the Outside of the Appliance Removing and Replacing Wirework RunnersCleaning Inside the Ovens Cleaning the DoorsTo Remove the Inner Glass To Clean the Inner Glass Door Panels Cleaning the Grill and Oven FurnitureTo Replace the Inner Glass Panel Replacing AN Oven Light Bulb TOP Oven Replacing AN Oven Light Bulb Main OvenGrill, ovens and timer do not work Oven fan is noisy Oven temperature is too high or too lowSomething not Working Service and Spare Parts Standard guarantee conditions Guarantee ConditionsTechnical Details Do not lift the appliance by the handles Installation InstructionsPreparing Cabinet for Fitting of Oven Choice of Electrical ConnectionBuilt In Installation Recommended Cabinet Dimensions in MillimetresTo Remove Cover of Mains Terminal HOW to Finish UnpackingConnecting to the Mains Terminal Connecting to a HOB or Cooker PointChecking Electrical Connections Fitting Into the Cabinet Page LU4 9QQ Telephone 0870 5