Electrolux EI24WC75HS manual Site Preparation, Leveling the Unit

Page 5

Installation 5

Site Preparation

1Position the unit on a flat, level surface capable of supporting the entire weight of the unit. Remember the unit will be significantly heavier once it is fully loaded.

2This unit requires a grounded and polarized 115 VAC, 60Hz, 15A circuit (normal household current).

3Avoid connecting the unit to a Ground Fault Interruptor (GFI). GFIs are prone to nuisance tripping which will cause the unit to shut down. GFIs are generally not used on circuits which power equipment that must run unattended for long periods of time.

4The unit must be installed according to your state and local laws and regulations.

WARNING

ELECTROCUTION HAZARD!

Electrical Grounding Required. This appliance is equipped with a three prong (grounding) polarized plug for your protection against possible shock hazards.

NEVER remove the round grounding prong from the plug.

NEVER use a two-prong grounding adapter.

NEVER use an extension cord to connect power to the unit.

Where a two-prong wall receptacle is encountered or a longer power cord is required, contact a qualified electrician to have it replaced in accordance with applicable electrical codes.

5Position the unit to allow free air flow through the front grille.

6Wipe out inside of unit with a damp cloth.

7Be sure to install the Anti-Tip bracket. Follow the instructions provided with the Anti-Tip bracket kit.

CAUTION

DO NOT install the wine keeper where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the unit.

DO NOT block the toe grille on the lower front of your wine keeper. Sufficient air circulation is essential for the proper operation of your refrigerator.

Installation clearances

Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:

Sides & Top

³⁄₈ inch

Back

1 inch

NOTE

If your wine keeper is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.

WARNING

The Anti-Tip Kit must be installed on this unit before it is used. All screws supplied with the Anti-Tip Kit are for mounting the bracket directly to wall studs. These screws will not work if used with sheetrock (dry wall) or anything other than wall studs.

Leveling the Unit

Your wine keeper should be positioned to allow easy access to a counter when removing wine. The wine keeper should be in a position where the door can be fully opened.

Position the unit on a flat, level surface capable of supporting the entire weight of the unit when full.

All four corners of the cabinet must rest firmly on the floor.

The cabinet should be level at the front and rear.

The sides should tilt ¼ inch (6 mm) from front to back (to ensure that door closes and seals properly).

This unit contains four (4) adjustable leveling legs and two (2) adjustable rollers located near the front leveling legs.

Image 5
Contents Use & Care Guide Finding Information Important Safety Instructions SafetySafety Precautions General PrecautionsInstalling the Wine Keeper InstallationLeveling the Unit Site PreparationInstallation Door Handle Mounting Instructions Starting the Unit Start-Up and Temperature ControlAdjusting the Temperature Sabbath Mode Description of FeaturesAlarms OperationProper Storage Storage / MaintenanceDisplay Rack Stocking RecommendationsAir filter MaintenanceWine Rack Removal/Installation If Service is Required TroubleshootingBefore You Call for Service Major Appliance Warranty Information Warranty Information

EI24WC75HS specifications

The Electrolux EI24WC75HS is a standout undercounter wine cooler that blends sophistication with advanced technology, ideal for wine enthusiasts seeking a refined storage solution. With its stylish stainless steel finish and seamless design, the EI24WC75HS complements various kitchen and home bar aesthetics while providing practical functionality.

One of the main features of this wine cooler is its capacity to hold up to 38 standard wine bottles, making it suitable for both casual wine drinkers and serious collectors. Its versatile shelving system includes a combination of wooden and metal shelves, allowing for optimal space utilization and easy access to your favorite vintages. The shelves glide smoothly, making it easy to place and retrieve bottles without hassle.

Temperature control is a vital consideration for wine storage, and the EI24WC75HS excels in this area. Equipped with dual-zone temperature settings, the cooler allows users to store red and white wines at their respective optimal temperatures. With a range of 41°F to 64°F, the cooler ensures that your wine is preserved in the best possible conditions, enhancing flavor and aroma profiles.

Another key characteristic of the Electrolux EI24WC75HS is its precise climate control technology. The integrated soft-close door minimizes temperature fluctuations while its efficient cooling system provides consistent performance. Additionally, the unit features a vibration-free environment to keep your wines undisturbed, safeguarding the integrity of your collection.

The cooler is also equipped with a UV-protective glass door, which blocks harmful light rays that can degrade wine over time. This not only helps maintain the quality of your wine but adds to the visual appeal, allowing you to showcase your collection without compromising its integrity.

User-friendly controls and a digital display provide easy monitoring of temperature settings, while interior LED lighting illuminates the bottles, making it easy to find your selections – even in low light conditions.

In summary, the Electrolux EI24WC75HS is an exceptional wine cooler that combines ample storage capacity, precise temperature control, and elegant design. With features that cater to both form and function, it is a perfect choice for anyone serious about preserving and enjoying wine.