Emerson FR24SL Troubleshooting Guide, Make sure there are at least 3-5 bottles in the unit

Page 6

Troubleshooting Guide:

You can easily solve many common problems by trying the suggestions below:

SYMPTOM

POSSIBLE CAUSE

 

 

Vibrations

Check to make sure the wine cooler is on a level surface

 

 

The wine cooler is not on a level surface

The door will not close

The racks are out of position

 

properly

 

 

 

 

This is simply a function of the cooling system. The lower the

Fan is always running.

setting, the more the fan will run. If the room is warmer than 77°F

(25°C), it will run more

 

The unit has been designed to run continuously when operating

 

at the lower temperatures

 

Check the wall outlet for power. Make sure the outlet is not

Unit has no power.

controlled by a wall switch

 

 

 

Make sure the cooling vents on each side of the cooler are not

 

obstructed. Have at least 5 inch (15cm) of space on each side of

 

unit.

The inside temperature

The unit will have difficulty in cooling if the set temperature is

32°F (18°C) below the ambient temperature.

does not seem correct

Example: if the ambient temperature is 86°F (30°C), the unit

 

 

will have difficulty cooling to 54°F (12°C).

 

When using the unit for the first time, it can take up to 24 hrs to

 

reach the desired temperature

The unit does not

It may not be plugged into the wall socket

operate

Make sure the wall socket is functional by testing another

 

electrical appliance in the power socket

 

Make sure the circuit breaker is not tripped or a fuse is blown

There is a puddle of

This wine cooler features a self-evaporation system. An external

water under / around the

drip tray is therefore not required for accumulating condensation.

wine cooler

If water forms under / around the wine cooler, the humidity level

 

in the room is too high. Either try to lower the humidity level in the

 

room (using for example a dehumidifier) or place the wine cooler

 

in an another room

 

 

The unit will not cool.

Make sure there are at least 3-5 bottles in the unit.

Power is On.

Allow at least 24 hours for the internal temperature to adjust

 

properly.

 

*Because of technological limitation , the interior temperature can be

 

set between 44°F (7°C) and 66°F (19°C) on the control panel only at

 

the room temperature of 77°F (25°C)

 

To achieve accurate temperature control, the unit should not be used

 

or operated in any of the following locations:

 

in a sunny place

 

in a room with poor air circulation such as a garage

 

near another heat producing appliance (dishwasher, oven,

 

refrigerator).

 

with an outlet shared with a refrigerator as it will drain power from

 

the unit.

 

built-in a wall recess, niche or cabinet.

-5-

Image 6
Contents Wine Cooler Important Safeguards Unpacking the unit Product OverviewControl Panel Overview Finding a good spot for your wine coolerSetting the temperature control Installation instructionsSetup Checklist Recommended temperatures for chilling wineCleaning instructions Interior Light InformationTroubleshooting Guide Make sure there are at least 3-5 bottles in the unitProperly Technical Specifications Circuit Diagram What other limitations apply to your warranty? How does state law apply to your warranty?Emerson