CE This machine complies with the directive BT 73/23
Electrical safety rules EN
Directive EMC 89/336 in conformity with the following standards:
-
ELECTRICAL CONNECTION
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
WARNING: THIS APPLIANCE MUSTBE EARTHED.
Should the appliance power supply cable need to be replaced, this must be carried out by a Service Force agent. The manufacturer declines any liability should this safety measure not be observed.
Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate.
The appliance should be fitted with a 13amp plug. The plug should be fitted with a 13amp ASTA approved BS1363/A fuse. The mains lead of the appliance should be connected as described below. The wires in the mains lead are coloured in accordance with the following code:
•Green and Yellow - Earth
•Blue - Neutral
•Brown - Live
In the plug the colours of the wires may not correspond with the markings identified with the terminals in your plug:
1)Connect the Green and Yellow (earth) wire to the terminal in the plug which is marked with the letter "E" or the earth symbol or coloured green and yellow.
2)Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.
3)Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.
4)Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.