Triamp Biamp | Electro-Voice Xi-1123A/106F guide

Electro-Voice Xi-1123A/106F Dimension Drawings Wiring/Connection Chart, Triamp Biamp

Dimension Drawings:

Wiring/Connection Chart:

Triamp to Biamp - Switch 4-Pin

Connector on inside of Input Panel.

Triamp			Biamp

LF:	Pins 1 In		LF:	Pins 1 In
	Pins 2 Out			Pins 2	Out
MB:	Pins 3 In		MB/HF:	Pins 3	In
	Pins 3	Out		Pins 3	Out
HF:	Pins 4	In	Pins 4 Pass Through
	Pins 4	Out

Pins 2 In Connected to Pins 1 Out

CAUTION

This Xi Loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the X-Array Xi Install Flying Manual and possible manual update notices. This system should be suspended with certified rigging hardware by an authorized rigging professional and in compliance with local, state, and federal overhead suspension ordinances.

Architectural & Engineering Specs:

PerformanceMatch

• P3000 (RL)	• CPS 2.8 • Dx38
• P1200 (RL)	• CPS 2.11

Xi-1123A/106F Part Numbers

•1149-3415 - Black

•1149-3404 - White

The loudspeaker system shall be a three-way tri-amp or bi-amp system. The system shall have an 12-inch, low-frequency loudspeaker with a nominal impedance of 8 ohms and a 2.5-inch voice coil. The low-frequency loudspeaker shall have a power handling capacity of 300 watts for 8 hours (as per ANSI/EIA RS-426 A & AES 2-1984). The mid-bass loudspeaker shall be a fully horn loaded, 10-inch driver with a 2.5-inch voice coil and a nominal impedance of 8 ohms. The mid-bass driver shall have a power-handling capacity of 300 watts for 8 hours (as per ANSI/EIA RS-426 A). The high-frequency section shall employ a compression driver capable of handling 75 watts, 1,760- to 20,000-Hz when pink noise of a 6-dB crest factor is applied for 2 hours (as per AES 2-1984 and ANSI S4.26-1984 standards). The loudspeaker shall be constructed of 18-mm, 13-ply birch and shall be trapezoidal in shape. The wedge angle shall be 18-degrees. The grille shall be constructed from 16 GA powder-coated steel backed by acoustically transparent fabric. The system shall be capable of very-high level operation with a band width of 53 to 19,000 Hz. The system dimensions shall be 458 mm (18.05 inches) wide by 801

mm(31.54 inches) high by 473 mm (18.64 inches) deep. The system shall employ flying hardware of a “track” style and have tworackst on the enclosure top and two tracks on the enclosure bottom. Net weight shall be 52.2 kg (115 lbs).

The loudspeaker shall be the Electro-Voice®Xi-1123A/106F.

12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043

www.electrovoice.com

Part Number 38110-274 Rev. A

U.S.A. and Canada only. For customer orders, contact Customer Service at:

800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:

+ 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. For customer orders, contact Customer Service at:

+ 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at:

800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO

Specifications subject to change without notice.

Xi-1123A/106F specifications

The Electro-Voice Xi-1123A/106F is an impressive loudspeaker designed to meet the needs of live sound reinforcement, installations, and other demanding audio applications. Known for its ability to deliver exceptional sound quality, this model is part of the Xi series, which is renowned for its advanced technologies and robust performance capabilities.

One of the standout features of the Xi-1123A/106F is its innovative transducer design. The loudspeaker incorporates a 12-inch woofer and a 1.5-inch high-frequency compression driver, which work in tandem to produce a wide frequency response. This design ensures that both the low-end punch and the high-frequency clarity are maintained, making it suitable for various musical genres and speech applications.

The Xi-1123A/106F utilizes Electro-Voice’s advanced Converging Elliptical Waveguide technology. This feature enables precise control of the speaker's dispersion characteristics, resulting in a focused sound that improves coverage and minimizes unwanted reflections. This makes the loudspeaker an ideal choice for larger venues where consistent sound distribution is critical.

Durability is a key consideration in the design of the Xi-1123A/106F. The enclosure is constructed from high-quality materials, ensuring it can withstand the rigors of touring and installation environments. The speaker also features a weather-resistant design option, making it suitable for outdoor use or in locations where moisture may pose a risk.

Another highlight of the Xi-1123A/106F is its versatility in setup. The loudspeaker can be utilized in various configurations, including installed horizontally or vertically, depending on the acoustic requirements of the space. It also comes with multiple rigging points for easy suspension if needed.

In terms of specifications, the Xi-1123A/106F boasts impressive performance metrics, with high power handling capabilities and low distortion levels. This allows for a rich and immersive audio experience, whether it is being used for live performances, presentations, or background music.

Overall, the Electro-Voice Xi-1123A/106F stands out as a powerful and reliable option for audio professionals seeking a high-performance loudspeaker. Its combination of advanced technologies, durable construction, and flexible deployment options makes it an invaluable asset in any sound reinforcement setup. With its ability to deliver clear, dynamic sound across a wide range of frequencies, the Xi-1123A/106F continues to be a popular choice amongst audio engineers and venue operators alike.