PROGRAMMING YOUR COFFEEMAKER
Setting the Clock
When the coffeemaker is plugged in, 12:00 will appear until you set the time.
Hold down the Hour or Minute button. The clock will begin flashing. Press either button to select the desired time. Hold buttons down to scroll through the digits or press and release to advance one digit at a time. When scrolling, the numbers will advance slowly and then speed up. When the number displayed approaches the desired time, press and release to advance one digit at a time. Be sure the PM indicator is on if a PM time is desired.
SETTING THE Auto On TIME
1.Press and hold the Prog/Auto On button for 2 seconds
The digital display will flash the default time (12:00PM). Follow directions under SETTING THE CLOCK (above) to program your
2.Set preferences
a.Push the
are brewing fewer than 5 cups. The
b.Press Regular or Bold button to select coffee flavor. The flavor setting will be shown on the digital display.
3.Once desired Auto On time and preferences are set...
Auto On setting mode will be exited automatically after 5 seconds.
4.To activate Auto On mode
Press the Prog/Auto On button once. The Auto On indicator and program indicator will be shown in digital display and the LED light will illuminate blue.
NOTE: To cancel Auto On setting, press the Prog/Auto On button once. The LED light will go off.
SETTING THE Auto Off TIME
1.Press and hold the Auto Off button for 2 seconds.
The digital display will flash the program default time at 2:00. Follow directions under SETTING THE CLOCK to program your coffeemaker to shut off from 0 to 4 hours after brew cycle is finished.
2.To exit/confirm Auto Off time setting: Do not touch any buttons. Auto Off mode will be exited automatically after 5 seconds.
BEFORE BREWING YOUR
FIRST POT OF COFFEE
During the manufacturing process, dust can get trapped in your coffeemaker. We recommend flushing out the system before brewing your first pot of coffee. Simply fill the reservoir and power on the unit. (See steps #2, #4 and #6 in MAKING COFFEE instructions, below). DO NOT
ADD COFFEE!
Once you’ve done that, brew a pot of real coffee and get ready to enjoy Cuisinart at its best!
MAKING COFFEE
Follow instructions in BEFORE BREWING YOUR FIRST POT OF COFFEE above.
1.Insert charcoal water filter
Follow directions for the preparation and insertion of the filter on page 9.
7