Cuisinart DGB-500C Making Coffee, Turning OFF Grind Function, Fill the Water Reservoir, Add Beans

Page 10

holding either button will allow you to scroll continuously, slowly at first, and then to accelerate to the rate of about three digits per second. As the desired time setting approaches, release the button and then press repeatedly to advance one digit at a time.

The Automatic Shutoff Time (ASO) may be programmed either before or during coffee brewing. You may also re-program the ASO time when brewing has been completed. If you do so, the Automatic Grind & Brewwill automatically account for any time that has already elapsed after brewing. For example, if you set the ASO for 40 minutes and 25 minutes have already elapsed, the Grind & Brewwill shut off automatically after 15 minutes (40 minutes minus the 25 elapsed equals 15 minutes).

Insert the Water Filter

a. Remove the filter from polybag and soak in cold tap water for 15 minutes.

b. Remove the water filter holder from the coffeemaker by lifting it out of the reservoir area with your thumb and forefinger.

c. Grasp stem in one hand. Using thumb of other hand, gently press down and pull toward you. Compartment will flip open.

d. Place the filter in the holder and close the water filter holder; you will hear a snap indicating it is in place.

NOTE: Caution must be used when inserting the charcoal filter. Improper placement in the holder can cause tearing of the filter skin.

e. Hold the filter under cold running tap water for 10 seconds to flush. You should place the hole openings in the side of the unit directly under the water stream.

f.Allow the filter to drain completely.

g.Replace the water filter holder in the reservoir area of the coffeemaker, pushing it all the way down to the base of the unit, along the reservoir wall.

Note: We recommend changing the water filter every 60 days or 60 uses, more often if you have hard water.

Replacement water filters can be purchased in stores or by calling customer service or through the Cuisinart web site.

TURNING OFF GRIND

FUNCTION

To turn off the grinding function, press the “Grind Off” button. An amber LED will be illuminated. Then press the On button.

MAKING COFFEE

Before you make the first pot of coffee in your new Cuisinart® Grind & BrewAutomatic coffeemaker, we recommend operating the coffeemaker once, using only water and a paper filter. This will remove any dust or residues which remain in the system from the manufacturing process.

1. Fill the Water Reservoir

Open the reservoir lid by pushing the release button and lifting up. Pour the desired amount of water in the reservoir using the step water indicator located at the rear of the reservoir.

2. Add Beans

Lift the grinder basket lid, using the recess on either side. Fill the basket with the desired quantity of beans.

9

Image 10
Contents Grind & Brew Automatic Coffeemaker DGB-500C Series Important Safeguards Special Cord SET Instructions Operating NoticeTable of Contents IntroductionQuest for Perfect CUP Coffee Features Benefits Grinder Basket Level IndicatorGrinder Basket Lid Charcoal Water FilterGrind Off with LED Indicator On/Off/Set Auto-Shutoff Switch with LED IndicatorLow Cups Setting with LED Indicator Program Setting with LED IndicatorSetting the Clock Programming Your CoffeemakerFill the Water Reservoir Making CoffeeTurning OFF Grind Function Add BeansBasket Power UnitSelect Cups Setting Close the Reservoir LidCleaning Maintenance To Make Coffee with PRE-GROUND BeansLimited THREE-YEAR Warranty WarrantyDecalcification Before Returning Your Cuisinart Product IB-4335-CAN