Programming Your Coffeemaker

1. Setting the Clock

When the coffeemaker is plugged in, 12:00 will appear until you set the time.

Entering “Time Set” Mode:

to scroll continuously, slowly at first, and then to accelerate to the rate of about three digits per second. As the desired time setting approaches, release the button and then press repeatedly to advance one digit at a time. The coffeemaker will start to brew at the programmed time.

The “Program” mode cannot be entered if the coffeemaker is in its “brew” cycle.

Exiting “Set Program Time” Mode:

To set the time, hold down either the “Hours” or “Minutes” button until the clock begins flashing (about 2 seconds). You are now in the “Time Set” mode and can operate either button to achieve the desired setting. The buttons can be held down to scroll through the digits, or pressed and released lightly to advance one digit at a time.

When scrolling, the numbers will advance slowly at first and then speed up to the rate of about three per second. When the number displayed approaches the desired setting, release the button and press repeatedly to advance one digit at a time. Be careful to make sure that the PM indicator is on if a

PM time is desired.

Exiting “Time Set” Mode:

The “Time Set” mode can be exited in one of two ways:

1.Press any button besides the “Hours” or “Minutes” button. This will exit the “Time Set” and activate the selected function.

2.Do nothing. If neither the “Hours” nor “Minutes” button is pressed for a period of five seconds, the “Time Set” mode will be exited.

2.Setting the Program Time:

When you press the “Program Set” button, it displays the current program time (default time 12:00 p.m.).

Entering “Set Program Time” Mode:

Press and hold the “Program Set” button (about 2 seconds) until the green light and LCD display begin to flash. This signals that you have entered the “Set Program Time” mode. The desired time can be set by pressing the “Hours” and “Minutes” buttons to scroll forward through the digits. Pressing and holding either button will allow you

“Set ProgramTime” may be exited in any of three ways:

1.Press the “Program Set” button. This will cause the coffeemaker to revert to its previous state. If it was OFF, it will return to the OFF position. If “Programmed”,

it will revert to this state, and so on. This is a safety feature.

2.Press any other button (except “Hours” or “Minutes”). “Set ProgramTime” will be exited and the function of that button will be executed.

3.Do nothing. If neither the “Hours” nor “Minutes” button is pressed for a period of five seconds, the “Set ProgramTime” mode will be exited and the programmed setting will be in effect.

Insert the Water Filter

a. Remove the filter from polybag and soak in cold tap water for 15 minutes.

b.Remove the water filter holder from the coffeemaker by lifting it out of the reservoir area with your thumb and forefinger.

c. Grasp stem in one hand. Using thumb of other hand, gently press down and pull toward you. Compartment will flip open.

d.Place the filter in the holder and close the water filter holder; you will hear a snap indicating filter is in place.

NOTE: Caution must be used when inserting the charcoal filter. Improper placement in the holder can cause tearing of the filter skin.

e.Hold the filter under cold running tap water for 10 seconds to flush. You should place the hole openings in the side of the unit directly under the water stream.

f. Allow the filter to drain completely.

DGB-600BC specifications

The Cuisinart DGB-600BC Grind & Brew Coffee Maker is a sophisticated kitchen appliance designed for coffee enthusiasts who appreciate the freshness of freshly ground beans. This versatile machine combines a built-in grinder with a standard coffee maker, allowing users to brew flavorful coffee from whole beans with convenience and ease.

One of the standout features of the DGB-600BC is its integrated burr grinder. Burr grinders are known for providing a consistent grind size, which is crucial for achieving the perfect extraction during brewing. Users can adjust the grind settings to suit their preferences, whether they prefer a coarse grind for a French press or a fine grind for espresso. This customization allows for a tailored coffee experience, enhancing the flavor profile of each brew.

The DGB-600BC also boasts a substantial 8-ounce bean hopper, which holds an ample supply of whole coffee beans. The hopper is designed with a sealed lid to keep beans fresh and retain their aromas. This feature is particularly beneficial for those who enjoy brewing coffee often, as it reduces the need for frequent refilling.

This coffee maker offers a 12-cup carafe capacity, making it ideal for households with multiple coffee drinkers or for entertaining guests. The stainless steel carafe retains heat while providing a sleek, modern look. An important characteristic is the machine's programmable settings, allowing users to set their brew time up to 24 hours in advance. This means you can wake up to the enticing aroma of freshly brewed coffee, ready and waiting.

With an easy-to-use control panel, the Cuisinart DGB-600BC includes an LCD display for clear programming and monitoring. Moreover, the machine features a grind-off option, which enables users to brew pre-ground coffee simply by bypassing the grinder if desired.

The DGB-600BC emphasizes user-friendliness with a removable grind chamber, which simplifies cleaning, and a built-in charcoal water filter that helps ensure that water quality is optimal for brewing, thus enhancing the overall taste of the coffee.

Moreover, this coffee maker is designed with a safety shut-off feature after brewing is completed, providing peace of mind for users who may be busy or distracted.

In summary, the Cuisinart DGB-600BC Grind & Brew Coffee Maker offers a perfect blend of technology and functionality, with its built-in burr grinder, programmable features, and user-friendly design, making it an excellent choice for any coffee lover looking to elevate their brewing experience.