Product Description
The Sx600 Series is a remarkably flexible indoor/outdoor speaker system designed to produce high-fidelity high-level audio in distributed applications such as stadiums, racetracks, amusement parks, fairgrounds, etc. Utilizing a 65° x 65° high frequency horn and a unique 2-element vertical midbass array, Sx600 gives you the clarity of a direct radiator with the high SPL and directivity of a properly designed horn system, especially in the important vertical plane. While intended primarily for vocal applications, the Sx600 accurately reproduces music if heavy bass is not required.
Important Features
The Sx600 is available as either a conventional 4 ohm low impedance system, the Sx600PI, or as a “constant voltage” system, the Sx600PIX. The PIX version features a 100% duty cycle rated 600 watt full isolation line transformer for operation with 70volt, 100volt, 140volt, or 200volt distributed systems.
The Sx600 comes with an all-new Super Strong Arm Mount, called the SuperSAMTM. This exclusive 2-part EV mounting system allows the installer to pre-set the exact down angle on the ground, fasten the separate mounting bracket by itself, and then mount the speaker to the bracket quickly and easily with a single bolt, setting the pan angle anywhere within a 180° arc in the process.
The three-layer stainless steel grill design is an acoustically transparent yet effective barrier to both condensation and heavy rain. The light- weight polypropylene enclosure has strategically placed internal passages to conduct moisture that may accumulate internally out to the side channels where it drains away.