Golden Alero GP52SS Owner’s Manual

Revised 0807

SPECIAL FEATURES

Brake Release Levers

For your convenience, your Alero is equipped with two brake release levers. The brake release lever can be located on the rear of each motor. (Fig. 12) These levers allow you to disengage the drive motors and maneuver the power wheelchair manually.

 

DO NOT USE YOUR ALERO WHILE THE DRIVE MOTORS ARE

 

DISENGAGED UNLESS YOU ARE IN THE PRESENCE OF AN

WARNING!

ATTENDANT!

 

 

 

DO NOT DISENGAGE THE DRIVE MOTORS WHEN YOUR

 

ALERO IS ON AN INCLINE. DOING SO MAY CAUSE THE

WARNING!

POWER WHEELCHAIR TO ROLL ON ITS OWN AND MAY

RESULT IN BODILY INJURY OR PROPERTY DAMAGE.

1.To ENGAGE the brakes on the motors, turn the brake release lever rearward. (Fig. 12)

2.To DISENGAGE the brakes on the motors, turn the brake release lever outward. (Fig. 13)

Fig. 12

Fig. 13

Wheel Locks

Wheel locks are fitted to both drive wheels. The wheel lock levers are located just in front of the drive wheels. (Fig. 14) Wheel locks should be engaged whenever you transfer in or out of your Alero and/or when the wheelchair is stationary.

WARNING!

NEVER ENGAGE YOUR WHEEL LOCKS WHILE OPERATING YOUR ALERO. YOUR ALERO IS EQUIPPED WITH A BRAKING SYSTEM AND THE WHEEL LOCKS ARE NOT TO BE USED AS A SUBSTITUTE FOR THESE BRAKES.

14

Page 14
Image 14
Golden Technologies GP52 owner manual Special Features, Brake Release Levers, Wheel Locks