Guide to milk texturing, Sleep Mode | Cuisinart em-200 specs

TIP: Make sure the tamping tool is dry so that wet coffee grinds do not stick to it.

6. Secure the portafilter holder to the brew head. (23-24).

NOTE: Check to see that the
espresso machine is ready for		23
use. Remember that if the power
light is solid and the manual,
and	are solid, the espresso
machine is on and is heating up
and ready to brew coffee.		24

7.Press the required volume button – manual for a continuous pour (25), the single espresso for a 1.5 oz. (26) or the double espresso for a 3.0 oz. (27).

NOTE: When using the manual operation you must press the button once to start the pour and again to stop the pour. However, with the single and double espresso operations you need only press these buttons once to start the espresso pour and the program will auto- matically stop the pour at the pre programmed level.

8.Check the espresso pour. The ideal pour is dark and caramel with reddish reflections.

9.Serve espresso immediately.

Caring for your Espresso Maker

	10. Remove the portafilter
	handle from the brew head
	(28).
	11. Discard the used coffee	28
	grinds or pod/pods from the
	filter basket (29). Place the
	portafilter holder into lock
	position when discarding
	grinds so basket stays in	29
	place.	29
	place.

Sleep Mode

After 30 minutes of non-use the espresso machine will automatically switch to sleep mode. An indication that the machine is in sleep mode is that the power light will slowly flash. After a further 1½ hours of non-use, the espresso machine will turn off.

guide to milk texturing

Milk texturing is the steaming of milk. The steam does two things; it heats the milk and mixes air with the milk to form a foamy texture. As with learning to make an espresso, perfecting the art of milk texturing takes time and practice.

1.Determine how much milk is needed based on the number of cups being made.

TIP: Keep in mind that the volume of milk will increase during the texturing.

2.Pour cold refrigerated milk into the stainless frothing pitcher, between ½ to ²∕³ full.

3.Press the steam button which will flash, and become solid when unit is ready for use.

4. Purge the steam wand of
any water. With the steam
wand positioned over the
drip tray, activate the steam
function by turning the		30
steam and hot water control
dial to the left (30). Once any
water has been purged stop
the steam by turning the		31
steam and hot water control		31
steam and hot water control
dial to the center position
(31).
5. Swing the steam wand to
the side of the espresso		32
machine (32).
6. Place the steam wand into
the milk so that the nozzle is
about a half-inch below the		33
surface and activate the		33
surface and activate the
steam function by turning the steam and hot
water control dial to the	setting (33).

em-200 specifications

The Cuisinart CUI EM-200 programmable espresso maker is designed for coffee enthusiasts who appreciate the rich and aromatic experience of freshly brewed espresso at home. This machine stands out with its combination of professional-grade features and user-friendly operation, making it an ideal choice for both beginners and experienced baristas.

One of the most notable features of the EM-200 is its 15-bar pressure pump, which is essential for extracting maximum flavor from coffee grounds. This high pressure ensures a rich and thick crema that is characteristic of well-brewed espresso. The machine also includes a built-in steam wand, enabling users to create frothed milk for lattes, cappuccinos, and macchiatos. This versatility allows coffee lovers to experiment with various drinks and flavors, enhancing their espresso experience.

The EM-200 is equipped with a programmable interface, making it easy to customize brew strength and control the amount of water used for each espresso shot. Its intuitive control panel features a backlit LCD display that provides clear visibility and easy navigation. Users can select between single and double shots, giving them flexibility depending on their coffee cravings.

Another important characteristic of the EM-200 is its stainless steel housing, which not only adds a modern aesthetic to any kitchen but also ensures durability and longevity. The machine's removable water reservoir simplifies the refilling process and makes it easy to clean. Additionally, the drip tray is removable, allowing for straightforward maintenance and mess-free operation.

Despite its array of features, the Cuisinart EM-200 remains user-friendly. It comes with a variety of accessories, including a portafilter, measuring scoop, and tamper, making it convenient for users to get started right away. The machine also supports both ground coffee and E.S.E. pods, catering to different preferences for coffee preparation.

Overall, the Cuisinart EM-200 programmable espresso maker combines technology, functionality, and design, appealing to a wide range of coffee lovers. With its robust performance, ease of use, and stylish appearance, this espresso maker is a perfect addition to any coffee lover's kitchen, allowing them to indulge in the authentic café experience from the comfort of their home.