VENTILATION
Designer
✪Installation Notes & Accessories
Ventilator Kits
•See Installation Requirements table for recommendations for each hood model
•A 1,200 CFM interior or 1,500 CFM exterior (if applicable) ventilator should be used over ranges/rangetops with gas grill
•Must use Viking ventilator kits with Viking hoods; use of
Kit model | Description | Hood models | Approx. ship wt. lbs. (kg) | |||
DIV300 | 300 | CFM interior power | DTWS3049/3649 | 15 | (6.8) | |
DIV440 | 440 | CFM interior power | DTWS3049/3649/4249 | 25 | (11.3) | |
DIV880 | 880 | CFM interior power | DTWS4849 | 36 | (16.2) | |
DEV900 | 900 | CFM exterior power | DTWS3049/3649/4249 | 39 | (17.6) | |
DEV1200 | 1200 | CFM exterior power | DTWS3649/4249/4849 | 53 | (23.9) | |
DEV1500 | 1500 | CFM exterior power | DTWS4849 | 47 | (21.3) | |
VIV300 | 300 | CFM interior power | DTWN3048/3648 | 27 | (12.2) | |
VIV600 | 600 | CFM interior power | DTWN3048/3648/4248 | 27 | (12.2) | |
VIV1200 | 1200 | CFM interior power | DTWN3048/3648/4248/4848 | 43 | (19.4) | |
VEV900 | 900 | CFM exterior power | DTWN3048/3648/4248 | 39 | (17.6) | |
VEV1200 | 1200 | CFM exterior power | DTWN3048/3648/4248/4848 | 53 | (23.9) | |
VEV1500 | 1500 | CFM exterior power | DTWN4848 | 47 | (21.3) | |
Duct Covers
•DCW for DTWN models o 12”H./12”D.
o Extend height of hood by 12”; conceal duct
•Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG).
o When ordering, specify finish code following accessory model number (for example,
Model | Description | Approx. ship wt. lbs. (kg) |
DCW30 | Duct cover for 30”W. DTWN | 10 (4.5) |
DCW36 | Duct cover for 36”W. DTWN | 11 (5.0) |
DCW42 | Duct cover for 42”W. DTWN | 13 (5.9) |
DCW48 | Duct cover for 48”W. DTWN | 14 (6.3) |
Duct Cover Extensions
•For use with DTWS Slim Traditional Wall Hoods
•Extends height of hood by up to 12” (for 10’ ceilings)
•Replaces adjustable duct cover supplied with hood
•Stainless Steel (SS), Black (BK), White (WH), Biscuit (BT), Stone Gray (SG), and Graphite Gray (GG). o Specify finish code following accessory model number (for example,
Model | Description | Approx. ship wt. lbs. (kg) |
DCCE1010 | Duct cover extension (for 30”W. DTWS hood) | 4 (1.8) |
DCCE1210 | Duct cover extension (for 36” & 42”W. DTWS hoods) | 6 (2.7) |
DCCE2010 | Duct cover extension (for 48”W. DTWS hood) | 9 (4.1) |
P L A N N I N G A N D D E S I G N G U I D E | R E L E A S E D 1 2 / 1 / 0 7 |
V I K I N G R A N G E . C O M • 1 - 8 8 8 - V I K I N G 1 | © 2 0 0 7 V R C — INFORMATION SUBJECT TO CHANGE |