Emerson PD5500 instruction manual Repeat Playback, Programmed Playback

PD5500 O/M.QXD 7/9/01 4:35 PM Page 10

REPEAT PLAYBACK

1

2

3

2

1

2

2

1

3

1

2

To repeat a single track, press the REPEAT button ❶ once. “REPEAT” will blink in the display. Press the Skip/Search FWD. ( ) or REV. ( ) button ❷ to select the specific track that you wish to repeat. When the desired track number appears in the display,

press the CD PLAY/PAUSE (❿ ) button ❸ to begin playback. The

specific track you selected will be repeated continuously.

To repeat all of the tracks on a disc continuously, press the REPEAT button ❶ twice. “REPEAT” will appear in the display. Press the CD PLAY/PAUSE (❿ ) button ❷ to begin all tracks repeat.

To cancel Repeat Playback, press the REPEAT button ❶ until “REPEAT” disappears from the display. You can also cancel Repeat Playback by pressing the STOP (■) button ❷.

PROGRAMMED PLAYBACK

The CD player in this unit has a 20-track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

1

2

3

Press the FUNCTION button to select CD; CD will appear in the display.

Open the CD Compartment door and insert your disc in the CD player. Close the CD compartment door. Wait for the CD player to read the table of contents and display the total number of tracks on the disc.

Press the CLOCK SET/MEMORY button. “P-01” (program number), “01” (track number) will appear and “MEMORY will blink in the display.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

10