PD5500 O/M.QXD 7/9/01 4:35 PM Page 11
4
1
1 |
2 |
5
1 |
1
2 |
6 |
Within 9 seconds, press the Skip/Search FWD. (
) or REV. (
) button ❶ to select the first track that you wish to program. Example: Track 5. When the desired track number (Example: Track 5) appears in the display, press the CLOCK SET/MEMORY button ❷ again.
Press either the Skip/Search FWD. (
) or REV. (
) button
❶to select the next track you wish to program (Example: Track 8). When Track 8 appears in the display, press the CLOCK SET/MEMORY button ❷ again.
Repeat step 5 until you have programmed up to 20 track numbers into the CD Program Memory. After programming up to 20 tracks in the CD Program Memory, press the CD
PLAY/PAUSE (❿ 
) button to begin programmed playback. “MEMORY” will appear in the display and playback will begin on the first track that you programmed.
7
2 |
3 |
1 |
The player will continue to play all of the tracks that you programmed in the order in which you programmed them. When the last programmed track has been played, the player will stop and the display will again show the total number of tracks on the disc. If you press the CLOCK SET/MEMORY button ❶ and then press the PLAY/PAUSE button ❷ again, playback will start on the first track you programmed and will continue until all the programmed tracks have been played. To cancel the Programmed Playback mode, press the CLOCK SET/MEMORY button ❶ to enter the program mode, and then press the STOP (■) button ❸.
PROGRAMMED REPEAT
1 |
It is also possible to use the Program and Repeat functions together to repeat a specific program indefinitely. First, program the tracks you wish to hear in the order you wish to hear them, as described above. Then, press the REPEAT button twice. Both the MEMORY and REPEAT indicators will appear in the display.
2 |
Press the PLAY/PAUSE (❿ 
) button to begin programmed repeat playback. The player will play the tracks you selected in the order in which you programmed them. When the last track in the program has been played, the entire program will begin again.
3 |
Program Repeat operation will continue indefinitely until you press the STOP (■) button.
11