RSA Lighting 60 DHWH specifications Housing, System Protection, Junction Box, Electrical, Lamps

DESCRIPTION

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes THREE (3) PAR30 Metal Halide lamps.

For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Project

Comments

Prepared by

Type

Date

A.... Housing

Housing, junction box & trimless meshplate assembly are all steel construction. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes

a beveled “knife-edge” lips to ensure a clean edge. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be con- figured for remote power.

E.... Lamps

Three (3) PAR30 Metal Halide lamps mount- ed in adjustable double gimbals. Lamp holders are individually removable and may be regressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver + snoot). 45º x 45º

locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes Med. base sockets.

F.... Mounting

Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Perforated flaps along housing sides for securing trimless insert to fixture and drywall.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 6.49” x 17.87”

COMBOLIGHT®

Next Generation

Recessed

Multi-Lamp Fixture

Three (3) Light PAR30 Metal Halide

New Construction

Housing

Trimless

15.01”		27.52”
	7.45”
12.01”
Double		23.39”
		17.07”
Gimbal
		5.69”
			Perforated
			Meshplate
45º x 45º	5.69”
Adjust
		Integral Electronic
		Metal Halide Ballasts	Thermal
For use with 39W or 70W PAR30MH lamps.			Protector
ORDERING INFORMATION
C3	E	N	N

Configuration	Lamp Type / Wattage Label
C3 = COMBOLIGHT	039M30 =	39 Watt PAR30 Metal Halide
Recessed Three (3) Light	070M30 =	70 Watt PAR30 Metal Halide

Housing

N = New Construction

C = Chicago Plenum

Power Supply

Voltage

1 = 120V

2 = 277V

Power Supply

E = Electronic Metal Halide Ballast

Lamp Mechanism

G = Double Gimbal

R = Retractable Double Gimbal

Trim Insert

N = Trimless

Trim Insert Finish

N = Trimless

Housing Interior/Electrical Door/Sleeve Finish

W = White

B = Black

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 022408

www.cooperlighting.com RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031