Getting Started
Table of Contents
Getting Started
Before Using Hood ______________________________________________7
Features _________________________________________________________7
Heat Sensor Thermostat _____________________________________7
Product Controls/Operation
Settings and Functions __________________________________________8
Hood Operation _____________________________________________8
DCH/DPPV Model Operation ________________________________9
Product Care
Cleaning and Maintenance _____________________________________10
Baffle Filters ________________________________________________10
Mesh Filters ________________________________________________12
Charcoal Filters ____________________________________________ 12
Hood Canopy _____________________________________________ 13
Enamel Finish _______________________________________________13
Stainless Steel Finish ________________________________________13
Brass Parts __________________________________________________14
Ductless Venting Chamber __________________________________14
Light Bulbs _________________________________________________14
Service Information _____________________________________________15
Warranty _______________________________________________________16
Before Using Hood
Although the hood is cleaned upon completion of the manufacturing process, you will probably need to clean your hood again after installation. Wipe the surface of the hood with a good household cleaner applied with a soft cloth, or stainless steel polish, depending on the finish of your hood. This will leave a protective finish on the hood.
Features
Heat Sensor Thermostat
Your hood is equipped with a heat sensor thermostat. The thermostat will turn on or speed up the blower if it senses excessive heat above the cooking surface. When the sensor activates, the letters “HOT” will appear on the display. If the blower is OFF - the sensor turns the blower on to HIGH speed. If the blower is on at a lower speed setting - the sensor turns the blower up to HIGH speed. When the temperature level drops to normal, the blower will return to its original setting and the display will be cleared.
CAUTION
If the power to the hood is not disconnected during cleaning, the heat sensor thermostat can cause the blower to turn on.
Getting Started
6 | 7 |