Viking F21286 Service Information, Cleaning Ductless Venting Chamber, Replacing the Light Bulbs

Page 7

Cleaning and Maintenance

Cleaning Ductless Venting Chamber

(Professional Hoods Only)

1.Remove the middle vent by gently raising up and pulling out.

2.Use the same cleaning directions as in “Cleaning the Hood Canopy” section.

3.After cleaning, replace the middle vent.

Replacing the Light Bulbs

When removing bulbs use an oven mitt to protect your hand in case the bulb breaks.

LED Lights - Indoor Models (All except 10” H.)

1.Unscrew bulb.

2.Replace the bulb with a 120 volt, Phillips R20 8-watt LED bulb (8R20/F90 2700 DIM). Can be purchased locally.

Halogen Lights - 10” H. Indoor and Outdoor Hoods

1.Unscrew halogen bulb.

2.Replace the bulb with a 120 volt, 50-watt halogen bulb.

Infrared Heat Lamp

1.Unscrew infrared bulb from heat lamp socket.

2.Replace the bulb with an R40, 120 volt, 250-watt infrared bulb. (not included with product)

112

 

 

 

1

 

 

 

 

 

 

2

 

 

1

 

 

 

2

Product Care

Service Information

If service is required, call your dealer or authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area or online at vikingrange.com

Have the following information readily available.

•Model number

•Serial number

•Date purchased

•Name of dealer from whom purchased

Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact Viking Range, LLC at

1-888-845-4641, or write to:

VIKING RANGE, LLC

PREFERRED SERVICE

111 Front Street

Greenwood, Mississippi 38930 USA

Record the information indicated below. You will need it if service is

ever required. The model and serial number for your hood is located behind the baffle filter on the left side panel in the lower right corner.

Model no. _____________________ Serial no. ________________________

Date of purchase _______________ Date installed ___________________

Dealer’s name __________________________________________________

Address ________________________________________________________

_______________________________________________________________

If service requires installation of parts, use only authorized parts to ensure protection under the warranty.

THIS MANUAL SHOULD REMAIN WITH THE HOOD FOR FUTURE

REFERENCE.

12

13

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Use & Care Manual Read and Save These Instructions CongratulationsEvacuate and Call the Fire Department Settings and Functions Table of ContentsBefore Using Hood Outdoor hood models should be installed in a covered Cleaning and MaintenanceCleaning Baffle Filters Using Outdoor HoodsRenewing Stainless Steel Finish Cleaning Hood CanopyMaintaining Charcoal Filter Recirculating Hoods Only Renewing Enamel FinishCleaning Ductless Venting Chamber Service InformationReplacing the Light Bulbs Hoods Warranty Three Year Full Warranty Warranty

F21286 specifications

The Viking F21286 is an exemplary model in the realm of modern maritime vessels, combining advanced technology with practical design to enhance both performance and versatility. This ship is recognized for its robust construction, making it suitable for a variety of marine applications, from commercial fishing to recreational cruising.

One of the standout features of the Viking F21286 is its cutting-edge hull design. The vessel's hull is engineered for optimal hydrodynamics, which reduces drag and increases fuel efficiency. This not only translates to lower operational costs but also enhances speed and maneuverability on the water. The material used in construction is often a composite of fiberglass and reinforced materials, providing strength while keeping the weight manageable.

The Viking F21286 is equipped with a powerful engine system that ensures reliable performance in diverse conditions. Typically, it features a twin-engine setup, allowing for greater control and redundancy. The engines are designed to be fuel-efficient, thus minimizing the environmental impact while maintaining high levels of output.

In terms of onboard technology, the Viking F21286 incorporates state-of-the-art navigation and communication systems. The vessel is often outfitted with advanced radar, GPS, and sonar capabilities, enabling real-time tracking and enhanced situational awareness. Modern touchscreen interfaces simplify operations, allowing crew members to manage systems with ease.

Moreover, the F21286 places a significant emphasis on safety and comfort. The ship is designed with anti-slip decks, reinforced railings, and advanced bilge systems that promote stability and security. The interior space is intuitively laid out, offering comfortable accommodations for crew and passengers alike, featuring amenities that make long voyages enjoyable.

Another notable characteristic is its eco-friendly initiatives. The Viking F21286 often comes equipped with systems that treat waste and reduce emissions, aligning with modern environmental standards. This commitment to sustainability reflects a broader trend in marine design aimed at protecting the oceans.

In conclusion, the Viking F21286 represents a harmonious blend of innovation, performance, and environmental responsibility. This vessel is not only built for resilience and efficiency but is also a testament to the commitment to improving maritime technology for future generations. Whether it's for commercial ventures or personal enjoyment, the Viking F21286 stands as a notable choice in the competitive maritime landscape.
Top Page Image Contents