Cleaning Hood Canopy, Renewing Enamel Finish

Cleaning and Maintenance

Remove the screws located on the side at the top and bottom of each spacer and slide spacer forward off of rear lip. Lower spacer rear, then slide spacer front out.

Grease trough (18” H. hoods only)

When cleaning filters in 18”H. hoods,

always remove the grease trough and clean by soaking in a sink with hot soapy water.

Cleaning Hood Canopy

Finishes in enamel or stainless steel are highly resistant to damage or discoloration due to grease, steam, and heat— provided that reasonable care is given to the equipment. The following suggestions will help keep your hood looking new.

1. Do not allow an excessive accumulation of grease. For best

results, you should wipe your hood clean with a cloth dipped in

warm, soapy water. DO NOT USE ABRASIVE CLEANSERS,

STEEL WOOL PADS, OR ABRASIVE CLOTHS. DO NOT use

cleansers that contain chlorides; the chlorides in the cleaner could

damage the stainless steel finish. If you need to scrape stainless

steel to remove encrusted materials, first soak the area with hot

towels to loosen the material, then use a wooden or nylon

spatula or scraper. DO NOT use a metal knife, spatula, or any

other metal tool to scrape stainless steel.

2. Every 3 months give your hood a thorough cleaning. On

Maintaining Charcoal Filter (Recirculating Hoods Only)

Replace the charcoal filters every 6 months to 1 year depending on the amount and type of cooking you do.

To replace, remove the baffle/charcoal filter assembly and slide the charcoal filter out of the channel and replace with a new one. Do not put the charcoal filters in the dishwasher.

Replacement filters are available through your local

Viking Range dealer, or you can visit the Online

Store at vikingrange.com

CAUTION

For general ventilating use only. DO NOT use to exhaust hazardous or explosive materials and vapors.

Product Care

painted surfaces, use a new coat of wax. A good wax

cleaner—available at either a grocery or hardware store—will

do both jobs at once. On stainless steel surfaces, use a good

stainless steel cleaner and polish.

Renewing Enamel Finish

If discoloration occurs, you should thoroughly polish the finish on your hood to renew its gloss and luster and to remove any grease residue which may have a yellowing effect. Use any good enamel polish, refrigerator polish, or automotive polish.

CAUTION

Do not use a porcelain cleaner or rough abrasive cleaner.

Renewing Stainless Steel Finish

Regular cleaning is the best way to assure that your stainless steel finish stays bright and unscratched. Use lemon oil or stainless steel polish to coat and protect stainless steel.

Product Care

F21286 specifications

The Viking F21286 is an exemplary model in the realm of modern maritime vessels, combining advanced technology with practical design to enhance both performance and versatility. This ship is recognized for its robust construction, making it suitable for a variety of marine applications, from commercial fishing to recreational cruising.

One of the standout features of the Viking F21286 is its cutting-edge hull design. The vessel's hull is engineered for optimal hydrodynamics, which reduces drag and increases fuel efficiency. This not only translates to lower operational costs but also enhances speed and maneuverability on the water. The material used in construction is often a composite of fiberglass and reinforced materials, providing strength while keeping the weight manageable.

The Viking F21286 is equipped with a powerful engine system that ensures reliable performance in diverse conditions. Typically, it features a twin-engine setup, allowing for greater control and redundancy. The engines are designed to be fuel-efficient, thus minimizing the environmental impact while maintaining high levels of output.

In terms of onboard technology, the Viking F21286 incorporates state-of-the-art navigation and communication systems. The vessel is often outfitted with advanced radar, GPS, and sonar capabilities, enabling real-time tracking and enhanced situational awareness. Modern touchscreen interfaces simplify operations, allowing crew members to manage systems with ease.

Moreover, the F21286 places a significant emphasis on safety and comfort. The ship is designed with anti-slip decks, reinforced railings, and advanced bilge systems that promote stability and security. The interior space is intuitively laid out, offering comfortable accommodations for crew and passengers alike, featuring amenities that make long voyages enjoyable.

Another notable characteristic is its eco-friendly initiatives. The Viking F21286 often comes equipped with systems that treat waste and reduce emissions, aligning with modern environmental standards. This commitment to sustainability reflects a broader trend in marine design aimed at protecting the oceans.

In conclusion, the Viking F21286 represents a harmonious blend of innovation, performance, and environmental responsibility. This vessel is not only built for resilience and efficiency but is also a testament to the commitment to improving maritime technology for future generations. Whether it's for commercial ventures or personal enjoyment, the Viking F21286 stands as a notable choice in the competitive maritime landscape.