Viking F20696A EN manual Rinse Agent, Wash Temperature, Energy Saving Tips

Page 13

Operation

Rinse Agent

A rinse agent causes water to flow off the dishes more quickly, preventing droplets that dry as spots and improving drying performance. Rinse agent come in solid and liquid forms. Your dishwasher’s rinse agent dispenser uses the liquid form. For best results, use a liquid rinse agent only if you have moderately hard to hard water. Rinse agent used with soft water can cause a cloudy film on dishes.

Fill level indicator

(refill when empty)

5

4

3

2

6

 

 

1

Rinse agent

dispenser

Filling the Rinse Agent Dispenser

Drying will usually be better if you use a rinse agent. To fill the dispenser, open the cap and pour the rinse agent into the dispenser up to the knob for dosage setting. The dispenser will hold approximately four ounces of liquid rinse agent.

Adjusting the Dosage of Rinse Agent

The rinse agent dosage is set by the manufacturer and is dispensed automatically into the final rinse. If necessary, the rinse agent dosage can be adjusted by inserting a screwdriver inside the filler hole where the adjustment device is set on “3.” It is recommended that the dial be adjusted only one number at a time.

NOTE: Too much rinse agent is not advisable as this might result in the formation of foam, especially if the dishwasher is connected to a cold water supply.

Wash Temperature

Hot water dissolves and activates dishwashing detergents, dissolves grease on dishes, and helps glasses dry spot free. If the incoming water is extremely cold due to unusually cold temperatures outside, if you have recently done laundry or run hot water for showers, or if your water travels a long distance from the hot water heater to the dishwasher, the running time of the dishwasher may be longer to heat the water to the required temperature.

Checking the Wash Temperature

An incoming water temperature of 120°F (49˚C) is recommended. However, the Sure Temp Water Heating System will ensure the water temperatures are correct for the cycle/options selected.

Energy Saving Tips

•Only start a wash when the machine is completely full.

•Do not prewash dishes. Simply scrape, load, and wash.

•Use the POTS/PANS program only for heavily soiled dishes.

•Connect the dishwasher to a cold water supply (cycle times will be longer).

Operation

24

25

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Viking Use & Care Manual Congratulations Important Safety Instructions Table of ContentsImportant Safety Instructions Features Model Features Cycle DataWash Cycles Features CyclesChanging a Program Preparing DishesComments Washing RecommendationsLoading the Dishwasher Rack AdjustmentsSilverware/Cutlery Basket Loading Silverware BasketStoring the Detergent Dishwasher DetergentRinse Agent Wash TemperatureEnergy Saving Tips Water Hardness MaintenanceTo Clean Filters TroubleshootingPoor Dishwashing Results Problem Possiblecause AND/OR Remedy Product Flash Fault Action Troubleshooting/Fault CodesOne Year Full Warranty Service Information WarrantyFive Year Limited Warranty Motor/Pump and Water DistributionNinety 90 Dayresidential Plus Warranty IfetimeL Limited Warranty

F20696A EN specifications

The Viking F20696A EN represents a fascinating blend of advanced avionics, robust design, and remarkable performance, making it a noteworthy model in the aviation industry. Built for versatility, the F20696A EN is tailored for both private and commercial use, providing exceptional reliability and comfort to its passengers.

One of the standout features of the F20696A EN is its powerful engine, designed for optimal performance in a variety of flight conditions. This aircraft is equipped with a high-performance engine that not only delivers superior thrust but is also fuel-efficient, allowing for extended range and reduced operational costs. This makes it an ideal choice for both short hops and longer-distance flights.

The airframe of the Viking F20696A EN is constructed using lightweight, durable materials, which contribute to its overall efficiency and flight characteristics. The design incorporates an aerodynamic shape, reducing drag and enhancing stability during flight. This is especially critical when operating in diverse environments or under challenging weather conditions.

In terms of technology, the F20696A EN is equipped with state-of-the-art avionics that enhance pilot situational awareness and streamline operation. These systems include advanced navigation aids, autopilot functionalities, and real-time data analytics that improve safety and performance during flights. The cockpit is ergonomically designed, promoting ease of use and comfort for pilots, thereby reducing workload during operations.

Comfort and quality of life for passengers are paramount in the design of the F20696A EN. The cabin is spacious, with plush seating and thoughtful layouts that enhance the travel experience. Natural lighting is maximized through large windows, creating an inviting atmosphere for passengers. Additionally, the noise-reduction features ensure a peaceful environment during flight, even at cruising altitude.

Overall, the Viking F20696A EN showcases a harmonious integration of performance, technology, and luxury. Its combination of reliable power, innovative avionics, and passenger comfort positions it as a competitive option for a range of aviation needs, whether for business travel, leisure flights, or charter operations. The F20696A EN exemplifies modern aircraft design, emphasizing efficiency and versatility in a rapidly evolving aviation landscape.
Top Page Image Contents