Water Hardness, Maintenance | Viking 450E, 325E manual

Water Hardness

Hardness of Water

Water has a different “hardness,” or mineral content, in different locations. The hardness is measured in grains per gallon (gpg). Find out your water’s hardness by asking your local water department, county extension agent, or water softening company. Ask how many “grains” of hardness are in your water.

Maintenance

Your new dishwasher is designed to give you years of dependable service. In order to maintain a high level of performance, you need to make sure your dishwasher is properly cared for and cleaned. Here are a few things you can do to make sure your dishwasher performs at its highest level.

The harder the water is, the more detergent you need. For the detergent amounts recommended for use in your location with your water, follow the guidelines in the chart. With hard water, you need more detergent to get dishes clean. With soft water, you need less.

Too much detergent with soft water can cause “etching,” a permanent cloudiness of glassware. If you have hard water, the dishes as well as the dishwasher itself may accumulate a gray deposit after some time. This deposit can be remedied by using a mild citric acid solution instead of detergent in the heavy wash program.

How Much Detergent to Use?

Primary Filter

(Do not remove primary filter)

Coarse strainer

Fine filter

The amount of detergent you use depends on the hardness of the water and on the cycle you select. Generally, only one tablespoon (per cup) of detergent is needed for a normal load.

Operation	Water hardness	Amount of detergent
Operation	0-3 gpg	(15ml)
	(grains per gallon)	(powder or liquid)
	Soft water	1 tablespoon

	Medium hard water	2 tablespoons
	4-8 gpg	(30ml)
	Hard water	3 tablespoons
	9-above gpg	(45ml)

NOTE: Line level on detergent dispenser represents 2 tablespoons.

NOTE: In areas with hard water above 12 grains, a water softener is recommended.

Filters

The filters are important, because they continuously filter wash water. Under normal operation, the filters are self cleaning and require no maintenance. If there is a heavy amount of food soil, sediment or hard water conditions, it may be necessary to clean the filters after each use. To clean, remove the filters as shown in the above illustration and soak overnight in a 50/50 solution of water and vinegar. Citric cleaner and water are also acceptable. Filters should appear bright when clean.

The Coarse Strainer

Large food particles that can’t pass through the drainage pump are collected in the coarse strainer. Lift out and empty the coarse strainer when necessary. Don’t forget to put it back again. It is normal for a small amount of water to remain in the coarse strainer area.

WARNING

Never operate the dishwasher without the filters in place.

Product Care

325E, 450E specifications

The Viking 200, 450E, and 325E are models of rugged all-terrain vehicles celebrated for their exceptional performance and versatility in challenging environments. Designed with advanced engineering and robust components, these vehicles are ideal for forestry, agriculture, and recreation.

Starting with the Viking 200, this model excels in its balance of power and efficiency. It is equipped with a reliable four-stroke engine that offers smooth acceleration and impressive torque. The overall design emphasizes stability, featuring a low center of gravity that ensures safe maneuverability on uneven terrain. With a spacious cargo bed and a payload capacity, the Viking 200 is perfect for hauling tools, equipment, or supplies.

The Viking 450E takes versatility to a new level with its enhanced features and technologies. This model boasts an upgraded engine that not only increases horsepower but also improves fuel efficiency. Its advanced four-wheel drive system allows for seamless transitions between different types of terrain, ensuring that users can traverse mud, snow, and rocky paths with ease. The Viking 450E also features adjustable suspension systems that enhance comfort, making long drives less taxing on the operator.

On the other hand, the Viking 325E stands out due to its compact design without sacrificing performance. It is particularly appreciated in environments where space is limited, allowing it to navigate tight trails and narrow pathways effortlessly. Despite its smaller size, the Viking 325E is equipped with a high-capacity engine and durable chassis that can withstand heavy use. The model incorporates cutting-edge technologies such as electronic fuel injection for improved responsiveness and low emissions.

Each of these Viking models is designed with user comfort in mind, featuring ergonomic seating and intuitive controls that cater to operators of various experience levels. High-visibility dashboards and integrated lighting systems ensure that users can operate these vehicles safely, even in low light conditions.

Overall, the Viking 200, 450E, and 325E showcase the brand’s commitment to quality and innovation in the all-terrain vehicle market. With their impressive features, robust performance, and cutting-edge technologies, these models continue to be a preferred choice for a wide range of applications, making them indispensable tools for outdoor enthusiasts and professionals alike.