Viking F20533 EN manual Leg Installation Electrical Connection 3-wire, Not secure for long transit

Page 9

Leg Installation

1

2

Electrical Connection (3-wire)

Note: If you have a 4-wire connection, see following section for 4-wire connection instructions.

 

1

 

1

 

3

 

2

Legs are packed in styrofoam top pack.

Note: It is strongly recommended

Note: Legs should be installed near to where

that a pallet or lift jack be used rather than tilting.

appliance is to be used, as they are

Raise unit about a foot. Unscrew temporary legs from

not secure for long transit.

couplings on all four corners.

3

4

Screw legs into couplings on all

Lower range gently to keep any undue strain from

four corners.

legs and internal mounting hardware.

WARNING

Electrical shock hazard.

To avoid risk or electrical

shock, personal injury or death; grounding product to the frame

of the unit may or may not be permitted through your local codes. If ground to the frame is not permitted then a 4 conductor power cord must be used.

Use a 3-wire power supply cord kit rated for 40 amps – 125/250 volts with closed loop terminals and marked for use with ranges.

Do not use a GFI circuit. Where local codes do not permit grounding through neutral, use a 4-wire power supply cord. The cord or conduit must be secured to the range with the strain relief bracket.

The electrical connection is made at the terminal block, which is located behind the access door on the back of the range.

WARNING

Electrical shock hazard. To avoid risk of electrical shock,

personal injury or death; verify your appliance has been

properly grounded in accordance with local codes or in absence of codes, with the National Electrical Code (NEC). ANSI/NFPA 70-latest edition.

1

Remove access door.

2

3

 

 

 

 

Remove supply cord strain relief

Feed supply cord up through hole in bottom

bracket and three supply cord mounting screws

of range back.

on terminal block.

 

16

17

Image 9
Contents Viking Installation Guide Table of Contents Fire/explosionhazard Dimensions Specifications Burn hazard Electrical Requirements Electrical & Gas RequirementsMoving, Handling, and Unpacking General Information InstallationNot secure for long transit Leg Installation Electrical Connection 3-wireElectrical Connection 3-wire Electrical Connection 4-wire Leveling/Adjustments/Alignment Connecting Gas & Electric Leveling/Adjustments/Alignments Anti-tip Device InstallationDoor Replacement and Adjustment Performance Checklist Final Preparation Service & Registration

F20533 EN specifications

The Viking F20533 EN is a remarkable piece of engineering that stands out in the realm of outdoor power equipment. Designed with both efficiency and durability in mind, this model caters to a variety of consumer needs, especially for those engaged in gardening, landscaping, or maintenance tasks.

One of the key features of the Viking F20533 EN is its powerful electric motor, which delivers consistent performance without the emissions associated with traditional gas-powered equipment. This not only makes it an eco-friendly option but also ensures quieter operation, allowing users to work in residential areas without disturbing neighbors. The motor is designed for longevity and reliability, promising years of dependable use with minimal maintenance requirements.

The cutting deck of the Viking F20533 EN is crafted from high-quality materials that withstand wear and tear from regular use. With a cutting width of 33 cm, it allows for efficient trimming of grass and other vegetation, making it suitable for a variety of lawn sizes and shapes. Its adjustable cutting height feature ensures users can select the desired grass length, promoting healthy lawn growth.

Incorporating advanced blade technology, the Viking F20533 EN features sharp, precision-engineered blades that provide a clean cut, reducing the risk of damage to the grass. This technology not only enhances the overall aesthetic of the lawn but also supports its health by preventing frayed grass edges.

An ergonomic design is at the heart of the Viking F20533 EN, which includes an adjustable handle to accommodate users of different heights. This feature ensures comfort during extended periods of use, preventing fatigue and promoting efficient mowing practices. The compact design enhances maneuverability, allowing users to navigate around obstacles with ease.

Another significant characteristic of the Viking F20533 EN is its integrated grass collection system. This feature minimizes the need for raking or additional cleanup after mowing, enhancing convenience. The grass collector is designed for easy emptying, ensuring that users spend less time on maintenance tasks and more time enjoying their outdoor spaces.

In summary, the Viking F20533 EN is an innovative solution for outdoor maintenance, combining ecological responsibility with efficiency and user-friendly design. Its advanced features and technologies make it an ideal choice for both amateur gardeners and seasoned landscapers, ensuring a well-maintained lawn with minimal effort. The investment in Viking F20533 EN is sure to pay dividends in the form of a beautiful, healthy outdoor space.