Care and Cleaning

TO CLEAN THE INSIDE AND THE EXTERIOR OF THE WINE CHILLER

Always safely unplug the chiller before cleaning. Do not use a hard brush or sponge. To clean the outside of the unit, use light soapy water with a cloth. When cleaning the inside DO NOT use soap or any detergent products. Use only a dry soft cloth or towel.

DEFROSTING THE WINE CHILLER

If frost builds up in and around the chiller, that means there is too much humidity near the unit. Safely unplug the chiller and once the frost melts, carefully wipe down the outside or inside of the chiller. Then, move the unit to a less humid location.

NOTE: DO NOT USE A HEATER OR A SHARP UTENSIL TO REMOVE THE FROST.

IN THE EVENT OF A POWER FAILURE

In the event of a power failure, do not open the wine chiller door too frequently to ensure the internal temperature remains the same. A slight and gradual increase in temperature should have no effect on the wine.

If the ambient temperature is very hot, remove the wine from the chiller and place in a cooler environment.

PREPARING THE WINE CHILLER FOR VACATION

For long vacations or absences, remove all bottles from the wine chiller and safely unplug the power supply. Move the thermostat to the lowest temperature setting before cleaning the interior and leave the door open.

TRANSPORTING THE WINE CHILLER

For transporting the wine chiller, secure all loose items, such as shelves by taping them securely in place to prevent damage.

NOTE: BE SURE THE WINE CHILLER ALWAYS STAYS IN AN UPRIGHT POSITION DURING TRANSPORTING.

88013 specifications

The Honeywell 88013 is a prominent device in Honeywell's lineup of advanced sensors and controllers, specifically designed for enhancing building control and automation systems. This device is known for its robust performance, reliability, and a suite of features that cater to a variety of applications in commercial, industrial, and residential settings.

One of the standout features of the Honeywell 88013 is its high-precision sensing capabilities. The device allows for accurate measurement of temperature, humidity, and various environmental parameters, ensuring that conditions can be optimized for energy efficiency and occupant comfort. Its ability to process data in real-time is crucial for making immediate adjustments, enhancing overall system performance.

The Honeywell 88013 utilizes cutting-edge technologies, including advanced microprocessor control and digital signal processing algorithms. These technologies enable the device to deliver precise readings and facilitate easy integration with existing building management systems. This integration capability is essential for creating a cohesive and intelligent environment where different systems can communicate and optimize performance collectively.

Another significant characteristic of the Honeywell 88013 is its user-friendly interface. The device often features intuitive controls and clear displays that make it accessible for both technicians and end-users. This design focus allows for easier monitoring and adjustments, thus minimizing downtime and maintenance challenges.

In terms of connectivity, the Honeywell 88013 supports various communication protocols, making it compatible with a wide range of building automation systems. This versatility is key for modern infrastructures that often comprise multiple devices and technologies.

The durability of the Honeywell 88013 is also noteworthy. Built to withstand various environmental conditions, the device features rugged construction and is often resistant to dust, moisture, and temperature fluctuations. This ensures reliable operation in diverse settings, from bustling industrial plants to quiet residential environments.

Lastly, the emphasize on energy efficiency is increasingly important in today's climate-conscious world, and the Honeywell 88013 plays a significant role in this aspect. By providing precise control over HVAC systems and other connected devices, it helps reduce unnecessary energy consumption, leading to cost savings and a reduced carbon footprint.

In conclusion, the Honeywell 88013 stands out due to its high precision, advanced technologies, user-friendly design, and robust connectivity options. Its durability and focus on energy efficiency make it an excellent choice for any building management system, striving to create smart, efficient, and comfortable spaces.