Honeywell 88013 Setting UP the Wine Chiller, Unpacking, Placing the Wire Racks in the Chiller

Page 6

SETTING UP THE WINE CHILLER

UNPACKING

Remove all packing materials and accessories. Examine the chiller for any damage such as dents or broken door. Do not install if chiller is damaged.

Allow the chiller to stand upright for approximately 2 hours before connecting the power source.

If discarding an old chiller, please see “Disposal Instructions” on page 3.

PLACING THE WIRE RACKS IN THE CHILLER

Carefully place the racks in the appropriate grooves. Notice the racks slide in and out easily, so do not pull them out completely when in use.

LOCATION OF THE CHILLER

Find a suitable area for your wine chiller. Do not place the chiller outside, or any other place where the chiller will be exposed to water or other harsh weather conditions. The chiller must not be placed in environments where the ambient temperature drops below 65°F (18.3°C) degrees or goes above 85°F (29.4°C) degrees. The ideal ambient temperature is 72°F (22.2°C).

INSTALLATION INSTRUCTIONS

The wine chiller is a free standing appliance, but can be installed next to counters and walls – but must not be placed under a counter.

For the chiller to function properly, it is important to have a clearance of at least 10 centimeters from the back of the chiller to any surface next to it. Also, there needs to be a clearance of at least 5 centimeters from the sides of the chiller next to it.

10 cm

wall

 

 

 

back

 

5 cm

 

 

Top of

 

 

the chiller

 

front

 

 

NOTE: THE SPACING IS NECESSARY FOR PROPER VENTILATION

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Perfect Chill Welcome Disposal Instructions Before YOU Throw Away Your OLD Wine ChillerImportant Grounding Instructions Control Adjuster Under the Door of the Chiller Installation Instructions Setting UP the Wine ChillerPlacing the Wire Racks in the Chiller UnpackingInterior Light Turning on the PowerAdjusting the Legs of the Chiller Placing Wine in the ChillerSetting the Temperature Adjusting the TemperatureIdeal Settings for Different Wines Control Panel below the Door of the Wine ChillerCare and Cleaning Trouble Shooting Problem Possible Causes What to do18.3C and 85F 29.4C. If Consumer Support

88013 specifications

The Honeywell 88013 is a prominent device in Honeywell's lineup of advanced sensors and controllers, specifically designed for enhancing building control and automation systems. This device is known for its robust performance, reliability, and a suite of features that cater to a variety of applications in commercial, industrial, and residential settings.

One of the standout features of the Honeywell 88013 is its high-precision sensing capabilities. The device allows for accurate measurement of temperature, humidity, and various environmental parameters, ensuring that conditions can be optimized for energy efficiency and occupant comfort. Its ability to process data in real-time is crucial for making immediate adjustments, enhancing overall system performance.

The Honeywell 88013 utilizes cutting-edge technologies, including advanced microprocessor control and digital signal processing algorithms. These technologies enable the device to deliver precise readings and facilitate easy integration with existing building management systems. This integration capability is essential for creating a cohesive and intelligent environment where different systems can communicate and optimize performance collectively.

Another significant characteristic of the Honeywell 88013 is its user-friendly interface. The device often features intuitive controls and clear displays that make it accessible for both technicians and end-users. This design focus allows for easier monitoring and adjustments, thus minimizing downtime and maintenance challenges.

In terms of connectivity, the Honeywell 88013 supports various communication protocols, making it compatible with a wide range of building automation systems. This versatility is key for modern infrastructures that often comprise multiple devices and technologies.

The durability of the Honeywell 88013 is also noteworthy. Built to withstand various environmental conditions, the device features rugged construction and is often resistant to dust, moisture, and temperature fluctuations. This ensures reliable operation in diverse settings, from bustling industrial plants to quiet residential environments.

Lastly, the emphasize on energy efficiency is increasingly important in today's climate-conscious world, and the Honeywell 88013 plays a significant role in this aspect. By providing precise control over HVAC systems and other connected devices, it helps reduce unnecessary energy consumption, leading to cost savings and a reduced carbon footprint.

In conclusion, the Honeywell 88013 stands out due to its high precision, advanced technologies, user-friendly design, and robust connectivity options. Its durability and focus on energy efficiency make it an excellent choice for any building management system, striving to create smart, efficient, and comfortable spaces.
Top Page Image Contents