Emerson RS1008 owner manual Reset Button, Reset Pinhole

RESET BUTTON

This unit includes a special protective device to prevent permanent damage to the internal computer in the event of a sudden power surge. If the system does not respond to any commands from the remote control, or the controls on the main unit, you may have experienced a power surge that triggered the internal computer to shut down automatically. If this occurs, use a toothpick, straightened paper clip, or similar object to depress and hold the RESET button (inside pin hole located on right side of display panel) for few seconds. The unit Power turns ‘Off’automatically.

RESET PINHOLE

Note: Although pressing the RESET button will unlock the internal computer after a power surge, it will also erase all of the preset tuner memories, clock, and timer settings. After turning ‘On’the unit again, you will need to reset the clock and re-program the preset station memories.

27

RS1008_ib042303.p65 27

23/4/2003, 14:51