Wolf Grill Module | 3 |
Grill Module Installation
IMPORTANT NOTE: Installation of the Wolf electric grill module must be completed by a qualified installer.
Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference.
This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedi- cated, grounded circuit which is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency, and amperage ratings are listed on the product rating plate.
Record the model and serial numbers before installing the grill module. Both numbers are listed on the product rating plate, located on the underside of the module. Refer to the illustration below.
RATING PLATE |
Location of rating plate.
wolfappliance.com/specs
Wolf Grill Module
Model Number | IG15/S |
Serial Number