Emerson ES13 owner manual Battery Replacem ENT, Using the Remote Controller Correctly

Page 8

BATTERY REPLACEM ENT

When the batteries become too weak, the operating distance of the remote controller is greatly reduced and you will need to replace the batteries.

NOTES:

•To maintain the accuracy and long life of the transmitter, do not press two or more buttons simultaneously.

•If the remote control is not to be used for a long time, remove the batteries to prevent possible damage through leaking batteries.

•Do not mix different types of batteries, or old batteries with new ones.

USING THE REMOTE CONTROLLER CORRECTLY

•Point the remote controller at the Remote Sensor.

•The functions of the buttons on the remote control are the same as the corresponding controls on the main unit.

•When there is a strong ambient light source, the performance of the infrared Remote Sensor may be degraded, causing unreliable operation.

•The maximum effective distance for remote control operation is about 15 feet.

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:

1.Use only the size and type of batteries specified.

2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.

3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones.

4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.

5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions.)

7

ES13_draft090902.p65

7

9/9/2002, 17:37

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ES13 Important Safety Instructions Model No ES13 Serial Number FCC Information Important NotesClass 1 Laser Product Unpacking and SET-UP Power SourcePreparation for USE Location of Controls and Indicators Remote Control Battery InstallationBattery Replacem ENT Using the Remote Controller CorrectlyOperating Instructions Speaker ConnectionSetting the Clock 莤莤响Tone Controls Bass BoostListening to the Radio MONO/STEREO Mode Switch Antenna InformationPresetting Stations in the Tuner Memory Recalling Preset Stations Changing Preset StationsPlaying Compact Discs Repeat Playback Pause ControlSKIP/SEARCH Controls Random Playback Intro Scan PlaybackProgrammed Playback ES13draft090902.p65 2002 Wake UP Timer Operation Setting the Wake Up TimeSnooze Function To Wake to the RadioTo Wake to the CD Player Sleep to Music Timer Stereo Headphone JackCare of the Cabinets Care and MaintenanceCompact Disc Care Troubleshooting Guide Symptom Possible Cause Solution RadioLimited Warranty Emerson Radio Corp

ES13 specifications

The Emerson ES13 is a leading-edge product designed to optimize industrial automation and control systems. This innovative device embodies a range of features and technologies that make it a powerful solution for various industrial applications.

One of the main features of the Emerson ES13 is its advanced processing capability. Equipped with a high-performance processor, the ES13 ensures fast data processing and response times, allowing for real-time monitoring and control. This is crucial for industries where timely interventions can prevent costly downtime and enhance operational efficiency.

The ES13 is built with a user-friendly interface, featuring an intuitive touchscreen display that simplifies navigation and operation. This ergonomic design allows operators to easily configure settings, monitor system performance, and visualize data trends. The incorporation of customizable dashboards and user-defined parameters further enhances usability, making it accessible for both seasoned professionals and new users alike.

In addition to ease-of-use, the Emerson ES13 showcases robust connectivity options. With support for various communication protocols such as Modbus, Ethernet/IP, and OPC-UA, the ES13 seamlessly integrates with existing systems and third-party devices. This flexibility ensures that industries can maintain compatibility with a variety of tools while leveraging the capabilities offered by the ES13.

Safety is a critical aspect of industrial operations, and the Emerson ES13 incorporates multiple safety features to protect both personnel and equipment. Its built-in safety protocols and redundancy measures minimize the risk of system failures, thereby ensuring more reliable operation in high-stakes environments.

The ES13 also includes advanced analytics and diagnostic features. With built-in data logging capabilities, it collects and analyzes performance metrics over time, enabling predictive maintenance and reducing operational costs. By leveraging historical data, the ES13 helps organizations identify patterns and implement improvements that foster greater efficiency.

Moreover, the Emerson ES13 is designed with scalability in mind. Its modular architecture allows companies to expand their systems easily without significant downtime. This adaptability meets the needs of growing businesses, accommodating increasing demands without requiring a complete system overhaul.

In summary, the Emerson ES13 stands out due to its powerful processing capability, user-friendly interface, robust connectivity, essential safety features, advanced analytics, and scalability. Together, these characteristics make the ES13 a versatile and reliable solution for enhancing industrial automation and controlling processes efficiently.
Top Page Image Contents