Viking F21212 Operating Triple Elements, 30W. Cooktop, Hot Surface Indicator Lights, Started

Started

Before Using Cooktop Cooktop Features

Getting

Operating Triple Elements

All burners have variable controls. Turn the knob counter-clockwise one click left to achieve the highest setting for the center single element. Continue turning counter-clockwise through the Med-Hi, Med, and down to the Lo setting.

Continuing to turn counter-clockwise will bring you into the Hi setting for the two inner elements combined. From here, continue turning counter-clockwise to go into the Med-Hi, Med, Lo-Med, and into the Lo settings of both elements.

Finally,continuing to turn counter-clockwise will bring you into the Hi setting for all three elements combined. Continue turning counter- clockwise to turn the elements down into the Med-Hi, Med, Lo-Med and into the Lo setting.

30”W. Cooktop

1 2 3

Product Controls

Hot Surface Indicator Lights

The cooktop has hot surface indicator lights. They are located on the front of the glass cooktop. The hot surface indicator light will glow red when the corresponding element is turned on. The light will remain on until the corresponding element has cooled to a safe temperature.

4 5 6 7 8

1.6-1/2” 1,200 watt element

2.12” 1,100/1,000/1,100 watt element

3.8-1/2” 2,000/1,000 watt element

4.Left front element control knob

5.Left rear element control knob

6.Center element control knob

7.Right rear element control knob

8.Right front element control knob

8 9