Breville BTM800 manual Cleaning theTea Basket Lid Tea Basket andTea Scoop, Cleaning the Power Base

4.To remove the build-up of tannin, the astringent chemical constituent of tea, fill the Glass Jug with water up to the water maximum mark (1500mL WATER MAX) and either:

a)Add the juice of one lemon, as well as the lemon and boil. Leave to soak overnight then discard the solution. Fill the Glass Jug with clean water, boil, then discard the water. Repeat if necessary.

or,

b)Add 6 tablespoons of white vinegar and boil. Leave to soak overnight then discard the solution. Fill the Glass Jug with clean water, boil, then discard the water. Repeat

if necessary.

5.Dry thoroughly with a soft, lint-free cloth before using.

NOTE:

Through regular use over time, scale build-up can affect the performance and the life of theTea Maker. Lime and phosphate are common forms of scale that can damage your

Tea Maker. Lime scale, a harmless mineral, comes in the appearance of white-coloured or rusty looking build up on the inner walls and inner base of the Glass Jug. Phosphate scale can’t be seen, however, it can cause the water to appear cloudy when heated.To prevent scale from damaging yourTea Maker, ensure to de-scale the Glass Jug regularly. Use a commercial de-scaling agent and follow the instructions that come with the agent.

Cleaning theTea Basket Lid,

Tea Basket andTea Scoop

1.Wash the Tea Basket Lid, Tea Basket and Tea Scoop in warm soapy water with a soft sponge, rinse and dry thoroughly. A non-abrasive liquid cleanser or mild spray solution may be used to avoid build-up of stains. Apply the cleanser to the sponge, not the accessory surfaces, before cleaning.

2.Alternatively, these accessories are dishwasher safe.

3.Let all surfaces dry thoroughly prior to using.

Cleaning the Power Base

1.Wipe the Power Base with a soft damp sponge.

2.Let all surfaces dry thoroughly prior to inserting the power plug into a wall outlet.

Storage

1.Ensure the Tea Maker is switched off, cleaned and dried before storing.

2.Ensure that the assembled Tea Basket is securely attached to the magnetic post within the Glass Jug.

3.Ensure that Jug Lid is securely in place.

4.Wrap the power cord around the power cord storage under the Power Base.

5.Stand the Tea Maker upright on the Power Base. Do not store anything on top.

30