TROUBLESHooting
POSSIBLE PROBLEM | EASY SOLUTION |
Tea Maker will not | • Check that the power plug is securely inserted into |
switch 'ON' | the outlet |
| • Insert the power plug into an independent outlet |
| • Insert the power plug into a different outlet |
| • Reset the circuit breaker if necessary |
| • For additional safety the Tea Maker is fitted with a |
| thermal cut out. In the event of severe overheating, |
| the Tea Maker will automatically shut down to prevent |
| further damage. Should this continue, call the Breville |
| Customer Service Centre |
TheTea Maker will | • Check that the Glass Jug is securely positioned on the |
not work | Power Base. |
The LCD light has | • The Tea Maker goes into standby mode if not used for |
gone out | 3 minutes. When in standby mode, the LCD screen will |
| cease to illuminate. |
| • To |
| - Remove then replace the Glass Jug from the |
| Power Base. |
| - Press any button on the Power Base except the |
| HOT WATERCancel or TEACancel buttons. |
| The LCD screen will |
I cannot select a | • Certain features cannot be selected or changed during |
certain function | the heating or brewing cycle. The LCD screen may |
| temporarily change or a sound alert may be heard, but |
| no changes to the cycle will be made. |
|
|
The LCD screen | • The LCD screen will display a flashing ‘RESET’ when |
displays 'RESET' | there is a resettable electronic issue. Remove the plug |
| from the wall outlet, wait 5 seconds, then plug back in. |
| • Call Breville Customer Service |
| ‘RESET’ message continues. |
The LCD screen | • The LCD screen will display a flashing 'ERROR' when |
displays 'ERROR' | there is a |
| Should this occur, call the Breville Customer Service |
| Centre |
|
|
32