PREPARATION FOR USE
Unpacking and Set-up
•The display carton contains the main unit, the remote control handset, six (6) different iPod® adapters, and the external FM wire antenna (attached to the bottom of the main unit). Remove all of the components from the carton and make sure that nothing is accidentally discarded with the packing materials. We recommend that, if possible, you save the carton and packing materials in the event that your unit ever needs to be returned for service. Using the original carton and packing materials is the only way to prevent your unit from damage during shipment.
•Remove all packing materials from the main unit and the accessories.
•Remove any descriptive labels from the front or top panels of your unit. Do not remove any labels from the back or bottom panels.
•Remove any small strips of tape that may have been used to secure the CD door and the secondary control cover door during shipment.
•Press on the right front corner of the CD door to release the lock and open the door. Remove the dummy CD transit protection card from the CD mechanism and discard it.
•Remove the “paper dummy iPod® ” from the docking area and discard it. That is for store display purpose only.
•Unwind the AC power cord and extend it to its full length.
•Place the main unit on a stable, level surface such as a table, stand, or shelf, convenient to an AC outlet, out of direct sunlight, and away from sources of excess heat, dust, moisture, vibration, and strong magnetic fields.
4
iE600_050407.p65 | 4 |
4/5/2007, 11:50