Operating Your ESPRESSO/CAPPUCCINO Machine

OPERATING YOUR ESPRESSO/CAPPUCCINO MACHINE

OPERATING cont’d

BEFORE USING YOUR

ESPRESSO MACHINE

Wash the filter holder and the stainless

filters in mild detergent and water.

Rinse thoroughly.

FILLING THE WATER TANK

•Ensure the Power switch and Selector Control are set to the ‘OFF’ position.

•Turn off at the power outlet and unplug the power cord.

•Lift up the water tank lid and remove the water tank. Fill with cold water to the maximum mark and replace in the machine, pressing down firmly so that the water valve opens. Close the water tank lid.

PRE-HEATING THE MACHINE

For optimal crema, it is recommended to carry out a complete brewing operation with water but without any coffee grinds before making your first coffee to ensure that the machine has been preheated.

•Make sure the selector control is in the ‘OFF’ position.

•Plug the power cord into a 230/240V electrical outlet, switch on and set the power switch to the ‘ON’ position.

•As soon as the orange ‘heating’ light turns off, set the selector control to the ‘ESPRESSO’ position and run a small amount of water through the brewing head for a few seconds without the filter holder in place.

PREPARING THE COFFEE

•Place the 1 or 2 cup filter into the filter holder and fill with espresso coffee (use the smaller filter for 1 cup and the larger filter for 2 cups).

•Use 1 level measure of espresso coffee for the 1 cup filter and 2 level measures for the 2 cup filter. It is important to use the correct amount of coffee as the filter perforations have been constructed for optimal pressure build up in the machine.

•Clean any excess coffee from the rim of the filter holder to ensure a proper fit under the brew head.

•Place the filter retainer clip in the release position, by pulling the clip back towards your hand.

• Place the filter holder underneath the

brew head so that the handle is positioned

to the left of centre. Lift the filter holder

until it contacts the brew head and rotate

PRE-WARMING CUPS

For optimal coffee temperature, pre-warm the espresso cups by placing them on the cup warming plate.

•The water tank should be filled with fresh cold water before use

•Check water level before use and replace the water daily

•Do not use mineral or distilled water

•Distribute the coffee evenly and press it lightly with the bottom of the measuring spoon (if there is too much coffee, the flow of water can become blocked).

to the right.

ESP6/8 specifications

The Breville ESP6/8 is a standout espresso machine that caters to coffee enthusiasts with its impressive array of features and thoughtful engineering. Bridging the gap between high-end performance and user-friendly operation, this machine offers a seamless experience for both novice baristas and seasoned coffee lovers.

One of the main features of the Breville ESP6/8 is its powerful 15-bar pump system. This ensures optimal extraction of flavors from the coffee grounds, producing rich and aromatic espresso shots. This machine is designed to deliver café-quality results right in the comfort of home. The thermocoil heating system is another highlight, providing rapid heat-up times and ensuring that the water temperature is just right for brewing, allowing for perfect extraction every time.

The Breville ESP6/8 incorporates a user-friendly interface with a digital display that simplifies the brewing process. This feature includes programmable settings for shot volume, allowing users to customize their espresso shots for a personalized experience. In addition to this, the machine offers a manual frothing wand, which gives users complete control over the milk texture and temperature. This is ideal for creating a variety of milk-based drinks such as cappuccinos and lattes.

The build quality of the ESP6/8 is another aspect that stands out. Constructed from durable materials, it ensures longevity while maintaining a sleek and stylish appearance that fits well in any kitchen decor. Its compact design also makes it a suitable option for those with limited counter space.

Additionally, the Breville ESP6/8 features an integrated cup warmer that preheats cups for optimal espresso serving temperatures, ensuring that every shot is enjoyed at its best. Its easy-to-clean components, including removable drip trays and water tanks, contribute to convenient maintenance.

Safety features such as overheat protection and non-slip feet further enhance the user experience. With its blend of advanced technologies and practical design, the Breville ESP6/8 stands as an excellent choice for anyone looking to elevate their home coffee-making experience. Whether you are experimenting with flavor profiles or perfecting your frothing skills, this machine is equipped to meet your needs and delight your palate.