Setting The Clock
When the system is connected to an AC outlet the STANDBY button light comes ‘On’.
The time display will show a flashing “AM 12:00”.
This is your indication that the time is incorrect and needs to be set.
NOTE: Although it is not necessary to set the clock in order to listen to the radio or CD player, the clock must be set correctly if you intend to use the timer to turn the system ‘On’ and ‘Off’ automatically.
Do not press the STANDBY (POWER) button. The system must be in the Standby mode to set the clock.
You have the option of displaying the time in
For example, “PM 6:00” would be displayed as “18:00”.
1.) Depress the MEMORY/CLOCK ADJ. button, “12Hr” flashes in the display.
Then press either the or buttons to alternatively to switch between the
18
MS3108_062806.p6518
28/6/2006, 16:54