4.) Press the OPEN/CLOSE button to close the CD door.
The flashing dashes “– – – – – – ” appear in the display as the player reads the Table Of Contents on each disc.
After reading the last disc the display will show the total tracks and playing time of DISC 1.
NOTE: It may take 15 to 20 seconds for the player to read the TOC of all 3 discs. The reading time may be even longer if you are using
5.) Press the PLAY/PAUSE button to begin playback ALL DISC.
To playback only Disc 1, Disc 2 or Disc 3, press the CD1, CD2 or CD3 buttons.
6.) When playback begins, adjust the VOLUME and EQ controls as desired.
7.) To skip to higher or lower numbered tracks press the or until the desired track number appears in the display, then release the buttons. Playback will begin on the desired track.
8.) To pause temporarily during CD playback press the PLAY/PAUSE button again.
The sound stops and the elapsed time flashes in the display, but the disc continues spinning.
Press the PLAY/PAUSE button once more to cancel Pause mode and resume playback at the same point.
25