Breville BEC300 manual To change automatic OFF mode from, Max sec

Page 8

EN 1

10

max. 4 sec

11

12

To stop the coffee flow before touch the lit control or move the slider towards the back of the machine until it stops.

To manually top up your coffee, touch any of the controls within 4 seconds from end of preparation and touch lit control again to stop.

To change the selected cup size during brewing select the new desired control. The machine will stop immediately if coffee volume extracted is larger than new desired control.

To accommodate a milk recipe glass, shift the cup support to either the left or right side magnets. The capsule will be automatically ejected.

ENERGY SAVING CONCEPT

11

1

>3 sec

13

>3 sec

Automatic Off mode: the machine will turn into Off mode automatically after 9 minutes of non use.

The machine can be turned into Off mode at any time by pushing any control for more than 3 sec., confirmed by the other 2 controls flashing.

To change automatic OFF mode from

9 to 30 minutes, when slider is closed press and hold both the Lungo and Ristretto controls for more than 3sec. Espresso control flashes once for con- firmation. To revert back to 9 minutes, repeat the same procedure. Espresso control flashes 3 times for confirmation.

8

Image 8
Contents Page Content BEC300Avoid risk of fatal electric shock and fire Descaling Pass them on to any subsequent user Overview Coffee machineCrus tasting gift Ristretto touchFirst USE Upright positionCoffee Preparation Close the sliderTo change automatic OFF mode from Max secProgramming the Water Volume Factory settings are25 ml / 0.84 oz MinutesCleaning DescalingPart of it in water A dishwasherBlinking light heating up Steady light ready MaxSpecifications Nespresso descaling kit Ref /CBU-2Troubleshooting Contact the Nespresso Club Ecolaboration ECOLABORATION.COMWill not be covered by this warranty Auclub@nespresso.comBEC300