![](/images/new-backgrounds/1063972/6397221x1.webp)
arb
How to Use the Mixer
TO OPERATE SPEED CONTROL
Note: With the Power Switch in the ON position, an accidental touching of the speed control, or other circumstances may result in turning on the mixer. If mixer runs when “0” speed is flashing, do not use; call
•Be certain the Power Switch is in the OFF position.
•Plug mixer into electrical outlet.
•Press Power Switch to ON position. ON/OFF Power Switch controls power to motor and control panel. The Speed Indicator light will flash “0”; this light flashes when the mixer is plugged in and ready to operate.
•Press RUN and unit runs until you press STOP. Upon pressing STOP, the unit automatically returns to “0” speed.
•To increase speed, press RUN.
•To decrease speed, press the DOWN ARROW.
•Press STOP when you want to stop the mixer, when mixing time stated in the recipe has been reached, or when ingredients have reached the desired consistency. When you press STOP the mixer will stop operating and the “0” will flash again, indicating that power is supplied to the control panel and the unit is ready to operate. DO NOT touch beaters. DO NOT use the STOP pad as a substitute for the Power Switch.
Note: The speed indicator will return to “0” during any of these power interruptions:
•Pressing the Power Switch to OFF position
•Power failure
•Unplugging unit
11