KitchenAid W10168334A installation instructions Plug in Refrigerator, Prepare the Water System

Page 10

4.Install the water supply tube clamp around the water supply line to reduce strain on the coupling.

5.Turn shutoff valve ON.

6.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the plastic part that is attached to the inlet of the water valve.

3.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

4.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

5.Turn shutoff valve ON.

6.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

 

A

 

B

 

C

 

D

 

E

A. Tube clamp

D. Compression nut

B. Tube clamp screw

E. Valve inlet

C. Copper tubing

 

7.On some models, the ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 3

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

C

D

E F G

A. Refrigerator water tubing

 

E. Ferrule (purchased)

B. Nut (provided)

 

 

F. Nut (purchased)

C. Bulb

 

 

 

G. Household water line

D. Coupling (purchased)

 

 

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Plug in Refrigerator

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

Prepare the Water System

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Open the freezer door and turn off the ice maker. The On/Off switch can only be accessed when the ice storage bin has been removed. The switch is located on the freezer door, on the left side of the wall that surrounds the ice storage bin. Move the switch to the OFF (right) setting.

2.Make sure the water filter is properly installed.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

3.Flush the water system. Use a sturdy container to depress and hold the water dispenser lever for 5 seconds, then release it for 5 seconds. Repeat until water begins to flow. Once water begins to flow, continue depressing and releasing the dispenser lever (5 seconds on, 5 seconds off) until a total of 3 gal. (12 L) has been dispensed. This will flush air from the filter and water dispensing system, and prepare the water filter for use. Additional flushing may be required in some households. As air is cleared from the system, water may spurt out of the dispenser.

4.Open the freezer door and turn on the ice maker. Move the switch to the ON (left) position. See the Use & Care Guide for further instructions on the operation of your ice maker.

■Allow 24 hours to produce the first batch of ice.

■Discard the first three batches of ice produced.

■Depending on your model, you may want to select the maximum ice feature to increase the production of ice.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Refrigerador de dos puertas con profundidad de mostrador Counter Depth Side by Side RefrigeratorRéfrigérateur côte à côte à profondeur de comptoir Tools and Parts Product Dimensions Top ViewModel Size Height a 65³⁄₄ 166.9 cm 68¹⁄₈ 172.9 cm Front View Side ViewModel Size Height a Height B Height C Door Swing Dimensions Opening DimensionsLocation Requirements Unpack the Refrigerator Electrical RequirementsWater Supply Requirements Decorative Panel Dimensions Clean Before UsingWeight Limits Dimension Height/WidthInstall the Door Panels Backer and Spacer Panel DimensionsDimension Backer Panel Spacer Panel Install New Water Line Install Dispenser Frame dispenser models onlyConnect to Water Line Connect Water SupplyConnect to Refrigerator Style Plug in Refrigerator Prepare the Water SystemDoor Alignment Complete InstallationLeveling and Door Closing If Refrigerator Does Not OperateSi necesita servicio Piezas y herramientasSi tiene preguntas ImportanteVista frontal Medidas del productoVista superior Tamaño del Altura Ancho Modelo y Estilo de puerta Vista lateral Medidas de aberturaTamaño del Altura a Altura B Altura C Modelo CurvaMedidas de oscilación de las puertas Requisitos de ubicaciónRequisitos eléctricos Método de conexión a tierra recomendadoRequisitos del suministro de agua Desempaque el refrigeradorLímites de peso Dimensiones del panel decorativoPaneles para puerta a la medida en algunos modelos Dimensión Altura/AnchoCómo instalar los paneles de la puerta Dimensiones del panel de soporte y espaciadorDimensión Panel de soporte Panel espaciador Cómo instalar la tubería de agua nueva Si es necesarioConexión del suministro de agua Conexión a la línea de aguaCómo enchufar el refrigerador Conexión al refrigerador EstiloPreparación del sistema de agua Nivelación y cierre de la puertaComplete la instalación Alineamiento de la puertaSi el refrigerador no funciona Outillage et pièces Si vous avez besoin de serviceSi vous avez des questions Vue de dessus Dimensions du produitVue de face Vue latéraleTaille du Hauteur Largeur Modèle et Style de porte Dimensions de l’ouvertureTaille du Hauteur a Hauteur B Hauteur C Modèle IncurvéeMéthode recommandée de mise à la terre Exigences demplacementDimensions pour le pivotement des portes Spécifications électriquesSpécifications de l’alimentation en eau Déballage du réfrigérateurPanneaux de porte personnalisés sur certains modèles Dimensions du panneau décoratifDimension Hauteur/largeur Indications de charge maximaleInstallation des panneaux de porte Dimensions du panneau d’appui et du panneau intercalaireDimension Panneau d’appui Panneau intercalaire Installation d’une nouvelle Canalisation d’eau Outillage NécessaireRaccordement de la canalisation deau Raccordement à une canalisation d’eauBrancher le réfrigérateur Raccordement au réfrigérateur StylePréparer le système deau Nivellement et fermeture de la porteAlignement des portes Achever l’installationSi le réfrigérateur ne fonctionne pas W10168334A

W10168334A specifications

The KitchenAid W10168334A is a versatile and innovative appliance designed to elevate your culinary experience. As a high-performance accessory for KitchenAid stand mixers, this product boasts several key features, technologies, and characteristics that make it a must-have for home cooks and baking enthusiasts.

At the heart of the W10168334A is its exceptional functionality. This attachment is specifically designed to facilitate various food preparation processes, ranging from slicing and shredding to grating and spiralizing. By utilizing the powerful motor of KitchenAid stand mixers, users can achieve consistent and efficient results in a fraction of the time it would take with traditional manual methods. The power and durability of the attachment ensure that it can handle a wide range of ingredients, including vegetables, fruits, and cheeses with ease.

One of the standout features of the W10168334A is its interchangeable blade system. This allows users to customize their food preparation according to specific recipes and desired textures. The attachment comes with multiple stainless steel blades that can be easily swapped out, providing options for thin slicing, coarse shredding, medium shredding, and spiralizing. This versatility makes it a practical choice for various culinary tasks, whether you're preparing fresh salads, gratins, or pasta dishes.

In addition to its versatile blade options, the KitchenAid W10168334A incorporates an easy-to-use design. The attachment is simple to install and remove from the mixer, ensuring a seamless transition between different food preparation tasks. Its lightweight construction allows for easy handling, while the high-quality materials used in the design guarantee longevity and resistance to wear and tear.

Moreover, the W10168334A attachment enhances overall kitchen safety, as it limits the need for direct contact with sharp blades during the food preparation process. Users can achieve precise results without the risk of accidental cuts or injuries, making it an excellent choice for both novice and experienced cooks.

In conclusion, the KitchenAid W10168334A stands out as a multi-functional kitchen accessory that combines power, efficiency, and safety. Its interchangeable blades, user-friendly design, and compatibility with KitchenAid stand mixers make it an essential tool for anyone looking to enhance their culinary skills. Whether you're whipping up a quick weeknight dinner or preparing a feast for friends and family, this attachment will undoubtedly streamline your food preparation process and inspire creativity in the kitchen.
Top Page Image Contents