KitchenAid S-302 Recommended grounding method, To do so may result in water damage

Page 7

Electrical requirements

Electrical Shock Hazard

l improper connectlon of the equipment-grounding conductor can result In a risk of electrical shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded.

lDo Not use an extensfon cord with this appliance. Such use may result in a fire, electrical shock, or other personal injury.

A 120-volt, 60-Hz, AC only, 15or-20 ampere, fused, electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

Recommended grounding method

DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY CORD GROUNDING PRONG.

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible Shock hazard, the cord must be plugged into a mating 3-prong, grounding-type wall receptacle, grounded in accordance with the-National Electrical Code, ANSVNFPA 70-latest edition, and local codes and ordinances. See Figure 1. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.

Figure 1

3-prong grounding type wall receptacle

- -

Water supply requirements

Use only l/4” copper tubing for water line.

The water line to the refdgerator must provide 15-l 00 psi waler pressure.

The preferred method of installing the plumbing to the refrigerator is through the wall. An optional method is installing the water line through a floor opening. If the copper tubing is installed through the floor, the hole cut in the floor must be angled 45Otoward the front.

iou will need enough l/4”- copper tubing to connect from water line to refrigerator, a saddle-type valve and a union. Rough in the water line before installing the refrigerator. See steps that follow.

Product/Property

Damage 1

Do Not install copper tubing In an area where temperatures drop below freezing.

To do so may result in water damage.

1.Find a 3/8” to 1” vertical cold water line near the refrigerator. Measure the distance from the cold water line to the refrigerator location. Add 24 inches for the final length of

copper tubing you will need. Cut both ends of copper tubing’square.

2.Turn off main water supply and clear water line.

Electric Shock Hazard.

Electric drill must be grounded to prevent severe or lethal shock if water is in line and enters drill during use.

Failure to ground drill may result in personal injury.

3..Groundelectric drill or use a hand drill. Drill a 3/l 6” hole in vertical cold water line. Attach a saddle valve to the water line with a clamp in an easily accessible location. Insert a washer between clamp and line. Check that inlet end is solidly in the drill hole. Tighten packing nut. Tighten the pipe clamp screws evenly so washer makes a watertight connection. Do Not overtighten or copper tubing could be crushed.

4.Slide compression nut and sleeve on copper tubing. Insert end of copper tubing completely into the outlet valve. Tighten compres- sion nut to outlet with an adjust- able wrench. Do Not over-tighten.

Product Damage

Flush at feast 2 qts. of water through the copper tubing and into a bucket before attaching to the refrigerator to get rid of any particles in water fine. Check for water leaks around the saddle valve.

Failure to do so may result in product damage.

5.Run water through water line, valve and copper tubing into a bucket to flush out any particles in the water line. Turn the saddle valve to the “OFF”position.

6.Route copper tubing to the refrigerator location.

compression nut copper tubing

sleeve union

7.Slide compression nut and sleeve over water line. .

8.Connect union to compression nut and sleeve and tighten. Do Not over-tighten.

power supply cord

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Refrigerator Custom door panels and top grille panels Before you startParts that must be ordered separately or custom-made Door panel kitsFront Side Tipping Radius Dimensions for built-in areaDimensions for tipping product +I- 118 toleranceOptional Top Grilles Product dimensionsLevelers extended 118 below rollers Levelers fully extended l-1/4 below rollers Top grillePanels Fied weights may cause product DamageAll dimensions +I- l/16 tolerance All dimensions shown Custom door panels, handle inserts and top grille panels+I- IW tolerance Side panel requirementsRefrigerator Side trim Slide compression nut and sleeve over water line Recommended grounding methodTo do so may result in water damage Route copper tubing to the refrigerator locationSoffit Product supportNumbers correspond to steps Now startIf side panels are not used Remove tape fromBottom of the refrigerator Door stops or hinges can be adjustedBottom grille to cabinet If built-in refrigerator does not operate How to arrange for ServiceIf you need Assistance

S-302 specifications

The KitchenAid S-302 is a versatile and robust stand mixer designed for both amateur cooks and culinary enthusiasts. With a powerful motor and a user-friendly design, this appliance makes preparing a variety of dishes easier and more efficient. Its stylish and classic design ensures that it complements any kitchen décor, while its durable construction promises longevity.

One of the standout features of the KitchenAid S-302 is its impressive motor, which delivers 325 watts of power. This ensures that even heavy doughs and large batches of ingredients can be mixed with ease. The mixer boasts a 10-speed control slider, allowing users to select the perfect speed for their specific mixing needs, from slow stirring to fast whipping. This flexibility is particularly beneficial when working with various textures and consistencies.

The six-quart stainless steel bowl is another highlight of the KitchenAid S-302. This generous capacity allows users to prepare large quantities of ingredients in one go, making it perfect for baking projects or meal prep. The bowl is designed with a sturdy handle for ease of use, and it is dishwasher-safe for hassle-free cleanup.

Another innovative characteristic of the KitchenAid S-302 is its planetary mixing action. This technology ensures that the mixing attachment rotates in one direction while the bowl rotates in the opposite direction, providing thorough ingredient incorporation and eliminating the need to scrape down the sides of the bowl frequently.

The S-302 also comes with various attachments, including a flat beater, a dough hook, and a whisk, making it suitable for a wide range of tasks, from making bread dough to whipping cream or mixing cake batter. The mixer is compatible with numerous optional attachments as well, such as pasta makers and food grinders, further enhancing its versatility.

Ease of use is a priority in the design of the KitchenAid S-302. It features a tilt-head design, which allows users to easily access the bowl and change attachments without hassle. The sturdy base provides stability during operation, ensuring the mixer remains steady while tackling tough mixing jobs.

In addition to its performance features, the KitchenAid S-302 comes in a variety of colors, enabling users to choose one that fits their personal style. With its powerful motor, extensive features, and sleek design, the KitchenAid S-302 is an essential tool for anyone looking to elevate their cooking and baking game.
Top Page Image Contents