KitchenAid S-302 installation instructions Product support, Soffit

Page 8

Product support

A solid soffit or a wood block is required to prevent the refrigerator from tipping forward after it is installed.

Determine what height the refrigerator will be when it is installed to fit opening. Determine the height to the top of the cover at the final installed height you plan to use.

Personal Injury/Property Damage Hazard

::2ip

block(s)

Block(s) must extend to fully cover wldfh of cover.

important: Block(s) must extend al least 2” over cover.

l Unit is top-heavy and may tip forward when the doors are opened.

lA solid soff it or 2” wood block is required above the refrigerator to prevent tipping during use.

l if solid soffrt is more than 1 inch above refrigerator, a wood block must be installed on the wail not more than

l/4 inch above the refrigerator cover.

Failure to follow these instructions could result in personal injury or property damage.

Your installation location may vary from the examples shown. However, you must support the refrigerator with a wood block or other adequate means of support located l/4” above the cover.

sotnt -

(more

than 1”

 

Anti-tip

 

soffit-

 

 

 

 

sbve

cQver)!

,wood

block(s)

(less

than 1”

k

 

 

above

cover)

 

 

 

 

 

 

114”

max.

4

- cover

 

 

 

 

 

 

 

 

 

-b

 

cover

 

 

 

 

 

c

 

Locate anti-tip wood blocks a maximum of 114”

1 above cover.

rear wail

\ rear wail

wail

When a sofflt is not available, locate wail studs in the refrigerator opening. Center one wood block and use wood screws to attach the wood block to the wail studs. Make sure screws engage wail studs a minimum of 1-l/2”. Screw the second wood block to the front of the first block. The wood blocks must extend 2 inches beyond the ends of the cover.

Page 8

if soffit Is more than one inch above cover, locate wail studs in the refrigerator opening. Center one wood block and use wood screws to attach the wood block to the wail studs. Make sure screws engage wail studs a minimum of 1-l/2”. Screw the second wood block to the front

of the first block. The wood block(s) must extend 2 inches beyond the ends of the cover.

If sofflt is less than one inch above cover, a wood support is not needed.

Image 8
Contents Refrigerator Before you start Parts that must be ordered separately or custom-madeDoor panel kits Custom door panels and top grille panelsDimensions for built-in area Dimensions for tipping product+I- 118 tolerance Front Side Tipping RadiusProduct dimensions Levelers extended 118 below rollersLevelers fully extended l-1/4 below rollers Top grille Optional Top GrillesFied weights may cause product Damage All dimensions +I- l/16 tolerance All dimensions shownCustom door panels, handle inserts and top grille panels PanelsRefrigerator Side trim Side panel requirements+I- IW tolerance Recommended grounding method To do so may result in water damageRoute copper tubing to the refrigerator location Slide compression nut and sleeve over water lineProduct support SoffitNow start Numbers correspond to stepsRemove tape from If side panels are not usedBottom grille to cabinet Door stops or hinges can be adjustedBottom of the refrigerator If you need Assistance How to arrange for ServiceIf built-in refrigerator does not operate

S-302 specifications

The KitchenAid S-302 is a versatile and robust stand mixer designed for both amateur cooks and culinary enthusiasts. With a powerful motor and a user-friendly design, this appliance makes preparing a variety of dishes easier and more efficient. Its stylish and classic design ensures that it complements any kitchen décor, while its durable construction promises longevity.

One of the standout features of the KitchenAid S-302 is its impressive motor, which delivers 325 watts of power. This ensures that even heavy doughs and large batches of ingredients can be mixed with ease. The mixer boasts a 10-speed control slider, allowing users to select the perfect speed for their specific mixing needs, from slow stirring to fast whipping. This flexibility is particularly beneficial when working with various textures and consistencies.

The six-quart stainless steel bowl is another highlight of the KitchenAid S-302. This generous capacity allows users to prepare large quantities of ingredients in one go, making it perfect for baking projects or meal prep. The bowl is designed with a sturdy handle for ease of use, and it is dishwasher-safe for hassle-free cleanup.

Another innovative characteristic of the KitchenAid S-302 is its planetary mixing action. This technology ensures that the mixing attachment rotates in one direction while the bowl rotates in the opposite direction, providing thorough ingredient incorporation and eliminating the need to scrape down the sides of the bowl frequently.

The S-302 also comes with various attachments, including a flat beater, a dough hook, and a whisk, making it suitable for a wide range of tasks, from making bread dough to whipping cream or mixing cake batter. The mixer is compatible with numerous optional attachments as well, such as pasta makers and food grinders, further enhancing its versatility.

Ease of use is a priority in the design of the KitchenAid S-302. It features a tilt-head design, which allows users to easily access the bowl and change attachments without hassle. The sturdy base provides stability during operation, ensuring the mixer remains steady while tackling tough mixing jobs.

In addition to its performance features, the KitchenAid S-302 comes in a variety of colors, enabling users to choose one that fits their personal style. With its powerful motor, extensive features, and sleek design, the KitchenAid S-302 is an essential tool for anyone looking to elevate their cooking and baking game.