Now start...
/II Remove top grille assembly ~ package, literature package and parts bag taped to the
refrigerator door and save.
Product Damage Do Not lower refrigerator against shipping base when removing the shlpplng base. Lowering the refrigerator against the shipping base could damage the components on the bottom of the refrlgerator.
Floor Damage
Keep cardboard shipping piece or plywood under refrigerator until it is installed in operating position.
Failure to do so may cause damage to floor covering.
Remove the four brackets El (2 on each side) that attach
n
shipping base
to the bottom of the refrigerator. Discard brackets and shipping base. Do Not remove tape and door bracing at this time.
Place appliance dolly under /3.1the side of the refrigerator.
Wrap strap from truck loosely around refrigerator. Insert two corner posts around handles to prevent scratching. Insert two corner posts over the cabinet side trim to prevent damage.Tighten strap making sure that handles and cabinet side trim will be protected.
Personal Injury Hazard
lBecause of the weight and size of the
lMost of the refrigerator’s weight is at the top. Extra care is needed when moving the refrigerator to prevent tipping.
Failure to do so could result in personal injury.
\
15
Numbers correspond to steps
Move refrigerator to /4. kitchen. Place cardboard
or plywood under reffigerator. Remove appliance dolly. Open doors and remove all boxes, parts packages and packing materfals from inside refrigerator and freezer compartments. Set aside until needed during installation.
Do Not remove any protective film until refrigerator is completely installed.
8.
18.
Page 8