KitchenAid 2000-101 Use only l/4 copper tubing for water line, Product/Property Damage

Page 7

Electrical requirements

Electrical Shock Hazard

l Improper connectlon of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified electrician or service techniclan If you are In doubt as to whether the appliance is properly grounded.

lDo Not use an extension cord with this appliance. Such use may result in a fire, electrical shock, or other personal injury.

. A 120.voft, 60.Hz, AC only, 15.or-20 ampere, fused, electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

Recommended grounding met hod

DO NOT, UNDERANY CIRCUMSTANCES,REMOVETHE POWERSUPPLYCORDGROUNDING PRONG.

For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a mating 3-prong, grounding-type wall receptacle, grounded in accordance with the National Electrical Code, ANSVNFPA 70.latest edition, and local codes and ordinances. See Figure 1. If a mating wall receptacle is not available, it is the personal responsibility and obligation of the customer to have a properly grounded, 3-prong wall receptacle installed by a qualified electrician.

Figure 1

wall receptacle

3-p&g grounding

L1pow~o~~pply

\

-

 

retainer

Water supply requirements

Use only l/4” copper tubing for water line.

The water line to therefrigerator must provide 15-100 psi water pressure.

The preferred method of installing the plumbing to the refrigerator is through the wall. An optional method is installing the water line through a floor opening. If the copper tubing is installed through the floor, the hole cut in the floor must be angled 49 toward the front.

You will need enough l/4”- copper tubing to connect from water line to relrigerator, a saddle-type valve and a union. Rough in the water line before installing the refrigerator. See steps that follow.

Product/Property

Damage

Do Not install copper tubing in an area where temperatures drop below freezing.

To do so may result in water damage.

1-Find a 3/8” to 1” vertical cold water line near the refrigerator. Measure the distance from the cold water line to the refrigerator location. Add 24 inches for the final length of

copper tubing you will need. Cut both ends of copper tubing.square.

Z-Turn off main water supply and clear water line

I Electric Shock Hazard. Electric drill must be grounded to prevent severe or lethal shock if water is in line and enters drill during use.

Failure to ground drill may

result in personal injury.

3.Ground electric drill or use a hand drill. _Drill a 3/l 6” hole in vertical cold water line. Attach a saddle valve to the water line with a clamp in an easily accessible location. Insert a washer between clamp and line. Check that inlet end is solidly in the drill hole. Tighten packing nut.

Tighten the pipe clamp screws evenly so washer makes a watertight connection. Do Not overtighten or copper tubing could be crushed.

4.Slide.compression nut and sleeve on copper tubing. Insert end of copper tubing completely into the outlet valve. Tighten compres- sion nut to outlet with an adjust- able wrench. Do Not overtighten.

Product Damage

Flush at least 2 qts. of water through the copper tublng and Into a bucket before attaching to the refrlgerator to get rid of any particles In water Ilne. Check for water leaks around the saddle valve.

Failure to do so may result In product damage.

5.Run water through water line, valve and copper tubing into a bucket to flush out any particles in the water line. Turn the saddle valve to the “OFF” position.

6.Route copper tubing to the refrigerator location.

compression nut copper tubing

sleeve union

7.Slide compression nut and sleeve over water line.

8.Connect union to compression nut and sleeve and tighten. Do Not over-tighten.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Par! No Rev. a Built-h RefrigeratorGrounded electrical outlet is InstallerBefore you start Parts that must be ordered separately or custom-made+/- l/8 tolerance Floor plumbing location Dimensions for built-in areaDimensions for tipping product Ounded electrical Let locationLevelers fully extended l-1/4 below rollers Top grille Product dimensionsLevelers Extended BelowCustom door Panels, handle Inserts and top grille panels Tied weights may cau!se product Damage.ISide trim Side+I- 1~ tolerance RefrigeratorProduct/Property Damage Use only l/4 copper tubing for water lineTo do so may result in water damage Product support When a soffit is not availableNumbers correspond to steps Now startEIF 111Remove two nuts from one end of the top panel If built-in refrigerator does not operate How to arrange for ServiceIf you need Assistance

2000-101 specifications

The KitchenAid 2000-101 is a versatile countertop appliance designed to cater to the diverse needs of home cooks. Renowned for its exceptional build quality and innovative features, this model brings a new level of convenience and efficiency to the kitchen.

One of the standout characteristics of the KitchenAid 2000-101 is its powerful motor. With robust performance, it can easily handle a wide variety of tasks, from mixing heavy doughs to whipping cream with precision. The motor's reliability ensures consistent results, allowing users to achieve the perfect texture for a range of recipes.

The design of the KitchenAid 2000-101 is both functional and aesthetically pleasing. It features a sleek, compact form that fits well on any countertop, making it an attractive addition to the kitchen décor. The appliance is available in multiple color options, enabling users to select one that complements their kitchen style.

A prominent feature of the 2000-101 is its user-friendly control panel, which simplifies operation. With speed settings that allow for total control, users can effortlessly adjust mixing speeds to suit different tasks. The appliance also includes a tilt-head design, providing easy access to the mixing bowl, facilitating hassle-free ingredient addition.

Versatility is another key characteristic of the KitchenAid 2000-101. It comes equipped with various attachments that can be easily interchanged. These include a flat beater, dough hook, and wire whip, providing the capability to mix, knead, and whip effortlessly. Furthermore, the attachment hub is compatible with a range of optional accessories, allowing users to expand the appliance's functionality, from pasta makers to food grinders.

The 2000-101 also prioritizes safety and efficiency. The sturdy construction guarantees stability during operation, while the bowl lock mechanism ensures secure mixing, thus preventing spills and accidents.

In terms of maintenance, the KitchenAid 2000-101 is designed for easy cleaning. Removable components can be quickly disassembled and are often dishwasher-safe, making cleanup a breeze after cooking sessions.

Overall, the KitchenAid 2000-101 stands out in the realm of kitchen appliances. Its combination of power, design, versatility, and user-friendly features makes it an ideal choice for both novice cooks and culinary enthusiasts alike, ensuring that it meets the demands of a modern kitchen. Whether baking, mixing, or whipping, this appliance is sure to deliver impressive results.
Top Page Image Contents