KitchenAid 2000-101 installation instructions 111Remove two nuts from one end of the top panel

Page 11

(111Remove two nuts from one end of the top panel

n

frame. Remove end

piece. Slide decorative panel into panel frame. Replace end piece using nuts.

/12Check that

. top grille is aligned with top trim on cabinet. Use six. screws to iighten top grille frame

to refrigerator. Check that the power switch is in the “ON”position.

Attach top grille decorative panel assembly to the keyhole bracket on the frame and pull down to secure. If the top grille decorative panel does not fit evenly within frame, the keyhole bracket can be moved side to side by adjusting the bracket screws or the decorative panel bracket can be moved up or down by adjusting the decorator panel bracket nuts.

Personal Injury Hazard

Reinstall set screws after door swing Is set.

Fallure to do so could result In personal Injury.

11 Check that doors can

. open freely. If not, the door stops or hinges

can be adjusted.

To adjust horlzontally: Loosen set screw in top and bottom hinges with Allen wrench. Determine the door swing desired. Hold door in that position and tighten the set screws. The doors have stops at 90°, 115“ and 137O positions. If the door stops cannot be adjusted to clear countertops, the countertops may need to be mitered. (Consult your builder to adjust countertops.)

To adjust vertically: Loosen, do not remove, top and bottom hinge screws. Lift door and bottom hinge to desired position. Tighten bottom hinge screws and then top hinge screws.

Check the water

11. connections at the bottom of the refrigerator

again for leaking. Any leaking can cause refrigerator and floor damage,

El Open both doors. Use two screws to attach

. bottom grille to cabinet.

‘El Put shelves and bins into the refrigerator and

. freezer compartments. Remove protective film from door frame.

Set refrigerator and freezer compartment controls to the midpoint between

“COLD” and “COLDEST”. Check that the compressor is operating properly. Check that all five interior lights are working.

To get the most efficient use from your new built-in re frigera tar, read your KitchenAid Use and Care Guide. Keep Installation Instructions and Guide close to built-in refrigerator for easy reference.

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Par! No Rev. a Built-h RefrigeratorGrounded electrical outlet is InstallerBefore you start Parts that must be ordered separately or custom-made+/- l/8 tolerance Floor plumbing location Dimensions for built-in areaDimensions for tipping product Ounded electrical Let locationLevelers fully extended l-1/4 below rollers Top grille Product dimensionsLevelers Extended BelowCustom door Panels, handle Inserts and top grille panels Tied weights may cau!se product Damage.ISide trim Side+I- 1~ tolerance RefrigeratorTo do so may result in water damage Use only l/4 copper tubing for water lineProduct/Property Damage Product support When a soffit is not availableNumbers correspond to steps Now startEIF 111Remove two nuts from one end of the top panel If you need Assistance How to arrange for ServiceIf built-in refrigerator does not operate

2000-101 specifications

The KitchenAid 2000-101 is a versatile countertop appliance designed to cater to the diverse needs of home cooks. Renowned for its exceptional build quality and innovative features, this model brings a new level of convenience and efficiency to the kitchen.

One of the standout characteristics of the KitchenAid 2000-101 is its powerful motor. With robust performance, it can easily handle a wide variety of tasks, from mixing heavy doughs to whipping cream with precision. The motor's reliability ensures consistent results, allowing users to achieve the perfect texture for a range of recipes.

The design of the KitchenAid 2000-101 is both functional and aesthetically pleasing. It features a sleek, compact form that fits well on any countertop, making it an attractive addition to the kitchen décor. The appliance is available in multiple color options, enabling users to select one that complements their kitchen style.

A prominent feature of the 2000-101 is its user-friendly control panel, which simplifies operation. With speed settings that allow for total control, users can effortlessly adjust mixing speeds to suit different tasks. The appliance also includes a tilt-head design, providing easy access to the mixing bowl, facilitating hassle-free ingredient addition.

Versatility is another key characteristic of the KitchenAid 2000-101. It comes equipped with various attachments that can be easily interchanged. These include a flat beater, dough hook, and wire whip, providing the capability to mix, knead, and whip effortlessly. Furthermore, the attachment hub is compatible with a range of optional accessories, allowing users to expand the appliance's functionality, from pasta makers to food grinders.

The 2000-101 also prioritizes safety and efficiency. The sturdy construction guarantees stability during operation, while the bowl lock mechanism ensures secure mixing, thus preventing spills and accidents.

In terms of maintenance, the KitchenAid 2000-101 is designed for easy cleaning. Removable components can be quickly disassembled and are often dishwasher-safe, making cleanup a breeze after cooking sessions.

Overall, the KitchenAid 2000-101 stands out in the realm of kitchen appliances. Its combination of power, design, versatility, and user-friendly features makes it an ideal choice for both novice cooks and culinary enthusiasts alike, ensuring that it meets the demands of a modern kitchen. Whether baking, mixing, or whipping, this appliance is sure to deliver impressive results.
Top Page Image Contents