KitchenAid 2000491 Move refrigerator close to /5 final position. Remove, Replace the water valve

Page 10

\3-prong groundmg Plug

power supply cord

Move refrigerator close to /5 final position. Remove

. cardboard or plywood from under refrigerator. Plug electrical cord into the grounded outlet. Use the screw from the parts package to install the plug retainer. Move the refrigerator evenly and straight into the opening. Check that the water line will not be kinked. Check that slack in the electrical cord hangs freely behind refrigerator or is placed on top of rehigerator next to cover.

Check that the power switch at the top of the

cabinet is in the “OFF”position.

Flush at least 2 qts. of water through the copper tublng and check for water leaks around the saddle valve. (See page 7 for complete Instructlons.)

refrigerator water valve )

Connect tubing assembly fitting to refrigerator water valve. Do Not overtighten. (It necessary, water valve can be removed from underside of the cabinet to attach the fitting. You may have to remove the wiring channel to get to valve.

leveling rods cl&wise using a 5/l 6” socket and ratchet until the cabinet weight is supported by the rear legs. Use l-3/8” open end wrench to lower the front leveling legs until the weight of the cabinet is supported by legs.

side/ trim

L

P-lIf side panels are not used,

. go to Step 10. Read Side panel requirements, page 6, before attaching.side panels to refrigerator.

/

Remove the screw between coils of water valve. Remove disconnected water valve and attach fitting.

Replace the water valve.)

Slide compression nut and sleeve on open end of tubing assembly fitting. Connect the union from water supply line to compression nut and sleeve on the tubing from water valve and lighten. Do Not overtighten.

Turn water supply valve to the open position. Turn refrigerator switch to the “ON”position. Check all connections for leaks.

Page 10

Open both doors. Place a

18level against the underside n of the door trim at the top of

the refrigerator. Adjust the front leveling legs until level and to the right height for the recessed area. Place the level on the crisper guide in the refrigerator section to check for levelness front to back. Turn the right, rear leveling rod until level and to the required height. Place the level on the freezer basket guide to level the left side of the cabinet.

Remove all tape and door bracing from

refrigerator door. Remove the six screws that attach the handle to the door frame. Slide the refrigerator door panel into door frame. If the panel is less than l/4” thick, a filler panel will need to be installed between the door and decorative panel. If the decorative panel is more than l/4” thick, it will have to be routed to have a l/4” edge on all sides. See Custom panel and insert dimensions for exact sizes to cut custom panels.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Built-h Refrigerator Part No Rev. aDoor panel kits Before you startParts that must be ordered separately or custom-made Custom door panels and top grille panelsDimensions for built-in area Dimensions for tippina prRollers Product dimensionsExtended Below ‘Top grilleAll dimensions +/- l/16 tolerance Custom door panels, handle inserts and top grille panelsRefrigerator Side panel requirements +/- I/W toleranceSide trim To do so may result In water damage Recommended grounding met hodCIRCUMSTANCES.REMOVETHE Powm suPPLYLORD Grounding Prong Route copper tubing to the refrigerator locationSolid soffit or a wood block Refrigerator From tlpping Forward After it Is InstalledYour installation location may vary Result in personal injury or property damageNumbers correspotid to steps Now startMove LIf side panels are not used Move refrigerator close to /5 final position. RemoveReplace the water valve Open both doors. Use To remove air from system and rinse tankIf vou need Askistance How to arrange for ServiceIf built-in refrigerator does not operate KitchenAid Canada, Inc

2000491 specifications

The KitchenAid 2000491 is a versatile and efficient kitchen appliance that elevates culinary experiences for home cooks and culinary enthusiasts alike. Renowned for its quality and innovative features, this stand mixer has become a staple in many kitchens.

One of the primary features of the KitchenAid 2000491 is its powerful 325-watt motor, which ensures efficient performance when mixing, kneading, and whipping. It can easily handle various tasks, from preparing cookie dough to dense bread mixtures, without straining. The sturdy construction and robust design make it reliable and long-lasting, perfect for frequent use.

The iconic tilt-head design is another significant characteristic of the KitchenAid 2000491. This feature allows users to easily access the mixing bowl and switch out attachments without hassle. The appliance comes equipped with a 4.5-quart stainless steel bowl, offering ample capacity for most recipes. The stainless steel material ensures durability and ease of cleaning, while a comfortable handle adds to user convenience.

Versatility is a hallmark of the KitchenAid 2000491, thanks to its compatibility with numerous attachments. Users can enhance their cooking experience by adding accessories such as pasta makers, food grinders, and vegetable spiralizers, allowing for a range of culinary creations from pasta dishes to homemade sauces.

In terms of technology, the KitchenAid 2000491 employs a planetary mixing action that ensures thorough ingredient incorporation. This unique mechanism allows the attachment to rotate around the bowl in addition to its own rotation, resulting in even mixing and less manual effort. The mixer also includes a multi-speed control with ten different settings, providing users with the ability to select the speed that best suits their task, whether folding, whipping, or kneading.

Additionally, the KitchenAid 2000491 showcases a timeless design available in various colors, making it a fashionable addition to any kitchen decor. Its compact size and weight make it easily portable and storable when not in use, while its reputation for quality and performance makes it a trusted companion for culinary adventures.

In summary, the KitchenAid 2000491 stand mixer melds power, versatility, and aesthetic appeal, making it a valuable tool for everyone from novice cooks to seasoned chefs. Its robust motor, compatible attachments, and thoughtful design ensure that it can meet the diverse needs of any kitchen, simplifying the cooking process while delivering outstanding results.
Top Page Image Contents