KitchenAid 2000491 Before you start, Parts that must be ordered separately or custom-made

Page 2

-.

Before you start...

Proper installation is your responsibility. Make sure you have everything necessary for correct installation. It is the responsibility of the installer to comply with the installation specifications provided.

The built-in refrigerator weighs over 400 pounds. The floor must be sturdy enough to support this weight plus the additional weight of door panels, food and ice.

Grounded electrical outlet is required. See Electrical requirements.

Location of the built-in refrigerator must permit the doors to open to at least 90°.

Because of the weight and size of the built-in refrigerator, two or more people are needed to move and safely install it.

Dimension’s that are shown must be used. Given dimensions provide required 0” clearance.

One inch of space is required between side of refrigerator and a corner wall to allow the door to open to at least a 90° angle.

Electrical Shock Hazard

It Is the customer’s responsibility: l To contact a qualified electrical

installer.

l To assure that the electrical lnstallatlon Is adequate and In conformance with National Electrlcal Code, ANSVNFPA 7&

Personal Injury Hazard

l Because of the weight and size of the built-in refrigerator, two or more people are needed to move and safely install It.

lMost of the refrigerator’s weight is at the top. Extra care Is needed when moving the refrigerator to prevent tipping.

Failure to do so could

result in personal Injury

II

Floor Damage

Keep cardboard shipping piece or plywood under refrigerator until It Is Installed In operating posltlon.

Failure to do so may cause damage to floor covering.

Importani: Observe all governing codes and ordinances.

Failure to meet codes and ordinances could lead to fire or electrical shock hazard.

Tools and materials needed for installation:

Parts supplied for installation:

top grille assembly base grille

tube assembly misc. parts bag

Ice-maker bin assembly

Remove parts from packages. Check that all parts were included.

Parts that must be ordered separately or custom-made:

Door panel kits

Three colors of acrylic door panel kits: White, Black and Almond, and a stainless steel door panel kit are available from your KitchenAid dealer. Each kit includes door panels and top grille panels. Follow kit instructions to install panels.

Kit Numbers for Panels

White 4210464

Black 4216469

Almond 4210548

Stainless 4210593

Steel

Custom door panels and top grille panels

See page 5 for custom panel dimensions and pages 10 and 11, Steps 9-12 for installation.

latest edftlon, and all local ) codes and ordinances.

Failure to do so could result In electrlcal shock or other personal Injury.

Electrical Shock Hazard

Special care must be taken when drilling holes Into the wall of the house. Electrical wires may be concealed behind wall covering.

Phlllips screwdrlver 5/16”and 34” socket

and ratchet

~4” copper tublng tubing cutter appliance dolly ~6” Allen wrench adjustable wrench cardboard or plywood 6, #6, or larger wood

screws

2, wood boards - 32” long (See page 7 for specifications.)

I - 3/8” open wrench - front leveler

stepladder wrench set knife

3116” and 114” drill bits

drill screwdriver level bucket shutoff valve stud locator 114” nut driver

Side panels

Check with your builder or installer to see if you need side panels that match your kitchen cabinets. Side panels must be custom-made. Side panel dimensions are given on page 6.

Page 2

Image 2
Contents Built-h Refrigerator Part No Rev. aDoor panel kits Before you startParts that must be ordered separately or custom-made Custom door panels and top grille panelsDimensions for built-in area Dimensions for tippina prRollers Product dimensionsExtended Below ‘Top grilleAll dimensions +/- l/16 tolerance Custom door panels, handle inserts and top grille panelsSide trim Side panel requirements +/- I/W toleranceRefrigerator To do so may result In water damage Recommended grounding met hodCIRCUMSTANCES.REMOVETHE Powm suPPLYLORD Grounding Prong Route copper tubing to the refrigerator locationSolid soffit or a wood block Refrigerator From tlpping Forward After it Is InstalledYour installation location may vary Result in personal injury or property damageMove Now startNumbers correspotid to steps Replace the water valve Move refrigerator close to /5 final position. RemoveLIf side panels are not used Open both doors. Use To remove air from system and rinse tankIf vou need Askistance How to arrange for ServiceIf built-in refrigerator does not operate KitchenAid Canada, Inc

2000491 specifications

The KitchenAid 2000491 is a versatile and efficient kitchen appliance that elevates culinary experiences for home cooks and culinary enthusiasts alike. Renowned for its quality and innovative features, this stand mixer has become a staple in many kitchens.

One of the primary features of the KitchenAid 2000491 is its powerful 325-watt motor, which ensures efficient performance when mixing, kneading, and whipping. It can easily handle various tasks, from preparing cookie dough to dense bread mixtures, without straining. The sturdy construction and robust design make it reliable and long-lasting, perfect for frequent use.

The iconic tilt-head design is another significant characteristic of the KitchenAid 2000491. This feature allows users to easily access the mixing bowl and switch out attachments without hassle. The appliance comes equipped with a 4.5-quart stainless steel bowl, offering ample capacity for most recipes. The stainless steel material ensures durability and ease of cleaning, while a comfortable handle adds to user convenience.

Versatility is a hallmark of the KitchenAid 2000491, thanks to its compatibility with numerous attachments. Users can enhance their cooking experience by adding accessories such as pasta makers, food grinders, and vegetable spiralizers, allowing for a range of culinary creations from pasta dishes to homemade sauces.

In terms of technology, the KitchenAid 2000491 employs a planetary mixing action that ensures thorough ingredient incorporation. This unique mechanism allows the attachment to rotate around the bowl in addition to its own rotation, resulting in even mixing and less manual effort. The mixer also includes a multi-speed control with ten different settings, providing users with the ability to select the speed that best suits their task, whether folding, whipping, or kneading.

Additionally, the KitchenAid 2000491 showcases a timeless design available in various colors, making it a fashionable addition to any kitchen decor. Its compact size and weight make it easily portable and storable when not in use, while its reputation for quality and performance makes it a trusted companion for culinary adventures.

In summary, the KitchenAid 2000491 stand mixer melds power, versatility, and aesthetic appeal, making it a valuable tool for everyone from novice cooks to seasoned chefs. Its robust motor, compatible attachments, and thoughtful design ensure that it can meet the diverse needs of any kitchen, simplifying the cooking process while delivering outstanding results.