English
ÂÂ Using AUX Mode
To listen to an auxiliary device, use a 3.5mm auxiliary cable to connect it to the CSMP145.
1.Press [POWER] to turn on the CSMP145.
2.Start playback on the auxiliary device.
3.Press [AUX/iPod] to set the CSMP145 to AUX mode.
The auxiliary device must have a 3.5mm headphone out or
Controls
When the CSMP145 is in AUX mode, the follow- ing controls are available.
Remote Key | Function |
[VOL +] | Increase the volume level. |
[VOL | Decrease the volume level. |
[MUTE] | Disable or enable speaker output. |
[BASS] | Turn the Bass Boost enhancement on or |
| off. |
[AUX/iPod] | Press to switch between AUX and iPod |
| modes. |
Use the controls of the auxiliary device directly to control playback.
Page 14 | Using Aux Mode |
|
|