Electronic Ignition System

Initial lighting and gas flame adjustments

Surface burners use electronic igniters in place of standing pilots. When the cooktop control knob is turned to the “LITE” position, the system creates a spark to light the burner. This sparking continues, as long as the control knob is turned to “LITE.”

The grill and griddle burner use an igniter glow bar that is either on or off in place of standing pilots. When the glow bar is hot, it sends a signal back to the safety valve, which opens allowing gas to flow to the grill and griddle burner.

Check Operation of Surface Burners, Grill and Griddle

Adjust Flame Height

Adjust the height of surface burner or grill flames.

NOTE: There is no adjustment for the griddle flame. Gas flow is at 100%, temperature is controlled by a thermostat.

The surface burner or grill “low” flame should be a steady blue flame approximately ¼” (0.64 cm) high.

1.Turn on power supply. “PF” should appear on the clock display. For further information, please refer to the user instructions located in the Use and Care Guide.

2.Push in and turn the surface burners and grill control knobs to the LITE position. For griddles, turn the griddle control knob to a temperature degree mark (300° recommended).

The surface burner flame should light within 4 seconds. Because of air in the gas line, a surface burner may take longer than 4 seconds to light the first time it is lit.

3.Check the flame on HI for a blue color. It should be clean and soft in character. No yellow tip, blowing or lifting of flame should occur. Occasional orange flashes are normal and reflect different elements in the air or gas.

The grill and griddle flame should light in 30 to 40 seconds. The griddle flame cannot be seen, but you should hear it ignite and feel heat from the griddle.

4.After verifying the proper burner operation, turn the control knobs to OFF.

If burners do not light properly:

■Turn surface burner control knob to the “OFF” position.

■Check that electrical supply is connected.

■Check that the circuit breaker has not tripped or the household fuse has not blown.

■Check that the gas shutoff valves are set to the “open” position.

■Check that burner caps are properly positioned on burner bases.

Recheck operation of surface burners, grill and griddle. If a burner does not light, turn off range, turn gas shutoff valve to “closed,” and contact your dealer or authorized service company for assistance.

A.Low flame

B.High flame

If the “low” flame needs to be adjusted:

The flame can be adjusted using the adjustment screw in the center of the valve stem. The valve stem is located directly underneath the control knob.

A. Adjustment screw

1.Remove the control knob.

2.Hold the knob stem with a pair of pliers. Use a small flat- blade screwdriver to turn the screw located in the center of the control knob stem until the flame is the proper size.

3.Replace the control knob.

4.Test the flame by turning the control from LO to HI, checking the flame at each setting.

Check Operation of Oven Element

1.Turn oven selector to BAKE. Default temperature appears in the temperature display.

2.Press ENTER. The first preheat light comes on when the oven temperature begins to rise.

3.When the second preheat light comes on, open oven door and hold hand above oven floor and feel for heat. Do not touch oven floor. Press CANCEL and turn oven selector to

RESET.

W10044930B specifications

The KitchenAid W10044930B is a versatile and highly efficient appliance that serves as a reliable addition to any modern kitchen. Primarily designed as a replacement part—specifically, a dishwasher lower spray arm—it embodies KitchenAid's commitment to quality, durability, and innovative technology.

One of the standout features of the W10044930B is its robust construction. Made from high-grade materials, this spray arm is engineered to withstand the rigors of daily use, ensuring longevity and consistent performance. The design of the spray arm optimally distributes water across the dishwasher's interior, allowing for effective cleaning of dishes, pots, and pans regardless of their placement within the appliance.

Technologically, the W10044930B demonstrates KitchenAid's advanced engineering. The lower spray arm is designed with multiple spray jets that enhance water coverage, ensuring each dish receives sufficient cleaning power. This feature significantly reduces the need for pre-rinsing, making washing dishes more efficient and eco-friendly. The spray arm operates at varying pressures, which adjusts based on the soil level of the items being washed, further optimizing water and energy consumption.

In terms of compatibility, the KitchenAid W10044930B is designed to fit a wide array of KitchenAid dishwasher models, making it a versatile replacement option for homeowners. Installation is straightforward, enabling users to replace a damaged spray arm without requiring professional assistance. This user-friendly aspect is a hallmark of KitchenAid’s design philosophy, which prioritizes ease of use alongside high performance.

Additionally, the W10044930B is part of KitchenAid’s focus on sustainability. By maintaining a strong cleaning performance while minimizing water usage, this product contributes to a more responsible approach to home cleaning practices.

Overall, the KitchenAid W10044930B lower spray arm is a testament to the brand's dedication to innovation and quality. With its durable construction, advanced cleaning technology, and compatibility across multiple models, it ensures that users enjoy a superior dishwashing experience, making it an essential component for maintaining cleanliness and efficiency in the kitchen. Whether addressing the needs of a busy family or a gourmet chef, the W10044930B stands out as a prime example of KitchenAid's commitment to excellence.