ReinstallBottom Vent, Complete Installation

Check Operation of Oven Broil Element

1.Close the oven door.

2.Turn oven selector to BROIL. HI will appear in the temperature display.

3.Press ENTER. Look through oven window. The top element should glow red, and heat should be radiating out of the door. Press CANCEL and turn oven selector to RESET.

If oven does not operate:

■Check that electrical supply is connected.

■Check that the circuit breaker has not tripped or the household fuse has not blown.

Repeat start-up. If the oven still does not operate, turn off range, turn gas shutoff valve to “closed,” and contact your dealer or authorized service company for assistance.

Install Burner Grates

Place burner grates over burner caps. The simmer plate may sit on one of the grates or be stored for future use.

ReinstallBottom Vent

1.Insert lower vent tabs into the slots on the front trim.

2.Push vent upward until the holes line up at top of vent.

3.Reattach the vent using the 4 screws.

A.Bottom vent

B.Reattach these screws.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Dispose of/recycle all packaging materials.

3.Check that range is correctly positioned in countertop cutout and that the range is level. See “Level Range.”

4.Check that the specified distances to cabinet surfaces were maintained. See “Location Requirements.”

5.Check that burner caps are positioned properly on sealed burner bases.

6.Check that backguard or island trim is installed. (If horizontal clearance to combustible materials behind cooking surface is less than 1" [2.5 cm]).

7.Check that the range is connected only to the type of gas for which it is certified for use.

8.Use a mild solution of liquid household cleaner and warm water to remove waxy residue caused by protective shipping material. Dry thoroughly with a soft cloth. For more information, see the “Range Care” section of the Use and Care Guide.

9.Read “Range Use” in the Use and Care Guide.

10.Turn on surface burners and oven. See the Use and Care Guide for specific instruction on range operation.

If range does not operate, check the following:

■Household fuse has not blown, or circuit breaker has not tripped.

■Gas valves are turned to the “open” position.

■If the gas supply line shutoff valve is open, turn to “closed” and contact a qualified technician.

■Electrical supply is connected.

■See “Troubleshooting” in the Use and Care Guide.

W10044930B specifications

The KitchenAid W10044930B is a versatile and highly efficient appliance that serves as a reliable addition to any modern kitchen. Primarily designed as a replacement part—specifically, a dishwasher lower spray arm—it embodies KitchenAid's commitment to quality, durability, and innovative technology.

One of the standout features of the W10044930B is its robust construction. Made from high-grade materials, this spray arm is engineered to withstand the rigors of daily use, ensuring longevity and consistent performance. The design of the spray arm optimally distributes water across the dishwasher's interior, allowing for effective cleaning of dishes, pots, and pans regardless of their placement within the appliance.

Technologically, the W10044930B demonstrates KitchenAid's advanced engineering. The lower spray arm is designed with multiple spray jets that enhance water coverage, ensuring each dish receives sufficient cleaning power. This feature significantly reduces the need for pre-rinsing, making washing dishes more efficient and eco-friendly. The spray arm operates at varying pressures, which adjusts based on the soil level of the items being washed, further optimizing water and energy consumption.

In terms of compatibility, the KitchenAid W10044930B is designed to fit a wide array of KitchenAid dishwasher models, making it a versatile replacement option for homeowners. Installation is straightforward, enabling users to replace a damaged spray arm without requiring professional assistance. This user-friendly aspect is a hallmark of KitchenAid’s design philosophy, which prioritizes ease of use alongside high performance.

Additionally, the W10044930B is part of KitchenAid’s focus on sustainability. By maintaining a strong cleaning performance while minimizing water usage, this product contributes to a more responsible approach to home cleaning practices.

Overall, the KitchenAid W10044930B lower spray arm is a testament to the brand's dedication to innovation and quality. With its durable construction, advanced cleaning technology, and compatibility across multiple models, it ensures that users enjoy a superior dishwashing experience, making it an essential component for maintaining cleanliness and efficiency in the kitchen. Whether addressing the needs of a busy family or a gourmet chef, the W10044930B stands out as a prime example of KitchenAid's commitment to excellence.