Start
The START pad begins any function. If
NOTE: To avoid unintentional operation of the microwave oven, a cooking function cannot be started if the microwave oven door has been closed for about 1 minute or more. “DOOR” will appear in the display until the door is opened and closed.
Cancel/Off
The CANCEL/OFF pad clears any incorrect command and cancels most functions except for the Control Lock and Demo Mode. It will not erase the time of day unless the display is in
The microwave oven will also turn off when the door is opened. Close the door and touch START to resume the cycle. If sensor cooking is interrupted by opening the door while the sensor is estimating the cook time, and the sensor animation is active in the display, the cycle will be canceled.
AddaMinute
The ADD A MINUTE control automatically starts the microwave oven at 100% power for 1 minute. Each additional touch of the control will add 1 minute of cook time, up to a total cook time of 10 minutes.
Cook time may be added to a cooking cycle at the current power level by touching ADD A MINUTE. During a manual cooking cycle, each touch of the ADD A MINUTE control will add 1 minute of cook time, up to a total remaining cook time of 10 minutes. The ADD A MINUTE control will not add minutes to a cycle that has a remaining cook time of 10 minutes or more.
Dial
Use the dial to select options, set the clock, set cook time and cook power, select food type and amount/weight, and adjust doneness.
To Use: Push dial and release to pop it out. Repeat to return dial to its flush position after each use to avoid breakage of the dial.
Select
Use the SELECT pad to select a chosen function, and to set the following options:
■Select a setting or food type, and go to the next step.
■Set or cancel clock. See “Clock” section.
■Set weight measurements to oz or lbs.
■Set amount measurements to pieces, cups or servings.
See “Meal Prep” sections for details on using the SELECT pad with the automatic cooking, reheating and defrosting programs.
Clock
This is a standard
To Set:
1.Touch and hold SELECT pad for 5 seconds.
“12:00” will appear in the display, with the hour (12) flashing. If you are changing the time, the current set time will appear, with the hour flashing.
2.Turn the dial to set the hour.
3.Touch SELECT or START.
The “minutes” digits will flash in the display.
4.Turn the dial to set the minutes.
5.Touch SELECT or START to complete the setting.
To Cancel Clock:
1.Touch and hold SELECT pad for 5 seconds. The
2.Touch CANCEL/OFF.
The “:” will appear in the display.
The next time the clock is set, “12:00” will appear in the display when the
Tones
Tones are audible signals that cannot be turned off, and their volume cannot be changed. These tones indicate the following:
One tone
■Valid entry (short tone)
Two tones
■Reminder, repeat each minute after the
■Hidden feature has been entered or exited
Three tones
■Invalid entry
Four tones
■End of cycle
■End of warming cycle
■Between cooking cycle and warming cycle
Fifteen tones
■Error
DemoMode
The Demo Mode is ideal for learning how to use the microwave oven. When set, functions can be entered without actually turning on the magnetron. The microwave oven light will come on, the fan will run, and the turntable will rotate. When the microwave oven is turned on while in Demo Mode, “no” and then “HEAt” will appear in the display.
To Turn On/Off: The microwave oven must be off. Open the door, then touch and hold COOK for 5 seconds. Three short tones will sound. Repeat to exit Demo Mode.
6