KitchenAid KHMS155L manual Easy Minute, Cooking in Stages, Reheating, Plates

To Use Auto Cook:

1.Touch AUTO COOK.

The display shows “PAD.”

2.Touch a number pad to select type of food from chart.

or

Touch AUTO COOK repeatedly to scroll through foods.

3.Touch number pads to enter quantity (except for Rice).

4.Touch START.

The display will count down the cook time.

When the cycle ends, “END” will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones.

5.Touch CANCEL or open the door to clear the display and/or stop reminder tones.

To Change Cook Time: Touch COOK POWER repeatedly to scroll through “MORE,” “LESS” or “NORML” time.

Easy Minute

The Easy Minute function allows the addition of cook time in

1-minute increments. If the EASY MINUTE pad is touched during cooking, 1 minute of cook time at the current cook power setting and/or in the current cooking stage will be added. If the pad is touched after cooking is over, 1 minute of cook time at 100% cook power will be added. Up to 99 minutes of cook time may be added by touching EASY MINUTE.

Cook power can be changed after touching EASY MINUTE by touching COOK POWER, touching number pads to enter the cook power, and then touching START.

Cooking in Stages

The oven can be set to cook at different cooking powers for various lengths of time, up to 3 stages.

Sensor cooking cannot be done in stages.

To Cook in Stages:

1.Touch COOK TIME, then enter a length of time to cook during the 1st stage.

2.Touch COOK POWER, then enter the desired power level for the 1st stage. See “Cooking Power” chart

3.Repeat steps 1 and 2 for the 2nd and 3rd stages.

4.Touch START.

The display will countdown each of the cook times. A “1,” “2” and “3” will appear on the display during their respective stages.

When the cycle ends, “END” will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones.

5.Touch CANCEL or open the door to clear the display and/or stop reminder tones.

The cook time and cooking power of the cycling stage can be changed after touching START without interrupting cooking.

To Change Cook Time: Touch COOK TIME. The countdown will freeze for a few seconds. Enter the new cook time and touch START or wait a few seconds for the countdown to resume.

To Change Cook Power: Touch COOK POWER repeatedly to scroll through the cook power levels. Touch START.

Reheating

Times and cooking power have been preset for reheating specific foods. Use the following chart as a guide.

*Sensor function

To Use Reheat:

1.Touch REHEAT.

2.Touch number pad from chart

or

Touch REHEAT repeatedly to scroll through foods.

3.Touch number pad to enter quantity (Casserole and Baked Goods only).

4.Touch START.

The display will count down the reheat time.

When the cycle ends, “END” will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones.

5.Touch CANCEL or open the door to clear the display and/or stop reminder tones.

To Change Cook Time: Touch COOK POWER repeatedly to scroll through “MORE,” “LESS” or “NORML” time.

2-4 Plates

Two 10¼" (26 cm) plates may be heated side by side, or 1 dish larger than the turntable, plus 2 plates on the cooking rack. For best results, halfway through heating, turn the plates (or larger dish) halfway around, and switch plates between top and bottom (if heating more than 2 plates).

The turntable must be turned off while heating 2 bottom plates or 1 larger dish. See “Turntable” section.