Progress Bar
Tones
1
Sensing
Reheating
1. Progress bar
Tones are audible signals, indicating the following:
One tone
■Valid entry (short beep)
■End of Timer countdown (long tone)
Two tones
■Reminder (short beeps), repeat each minute for 15 minutes after the
■Between stages (short beeps)
Three Tones
■Invalid entry (short beeps)
The progress bar is a visual picture of the estimated running time of a cooking cycle. It will appear during sensor cooking functions. The line appears below the word “Sensing,” and shows progress by the darkening of the line from the left. After the sensor is finished sensing, the remaining cook time replaces the word “Sensing” at the top of the display, but the progress bar continues to be displayed.
Start
The START button will start any function.
If
For added convenience, the “Start” touch pad is also available on some display screens, and provides the same function as the START control button.
Off/Cancel
The OFF/CANCEL button clears any incorrect command and cancels most functions except for the Timer, Child Lock and Learning Mode. It will not erase the time of day.
The oven will also turn off when the door is opened. Close the door and press the START button or touch “Continue” on the display screen to resume the cycle. A sensor cooking cycle may not be resumed if interrupted by opening the door.
Clock
This is a
To Set Clock: Press CLOCK, and follow directions.
To Hide Clock: Press CLOCK, then press OFF/CANCEL. “Home” will appear in place of the time of day on display screen.
To Display Clock: Press CLOCK, then press START.
Four tones
■End of cycle (long tones)
To Disable Tones: Turn volume off using the “Hints & Settings” menu.
Timer
The Timer can be set in minutes and seconds, up to 90 minutes, and counts down the set time.
NOTE: The Timer does not start or stop the oven.
8:16 | TIMER |
| 1 |
04:44 |
| ||
|
|
Reheat Defrost
Cook Grill
Melt MORE
CHOICES
1. Timer countdown
When the Timer is in use, the oven can still operate. During an oven operation, “Timer” will appear in the upper,
To Set: Press TIMER SET/OFF, enter desired time and touch “Start.” The time can be reset during the countdown by pressing TIMER SET/OFF, entering a new time, then pressing START.
To Cancel: Press TIMER SET/OFF twice.
9